4 recalls found. |
DEFECT #1 - STEERING:WHEEL AND HANDLE BAR
Posted on: 1979-10-12
Description
Consequence
Corrective Action
Notes
Possibility that the steering shaft was improperly installed.this could cause a binding condition which, even though not noticeable to the driver, might subject the steering shaft to abnormal stresses under certain conditions.these stresses may cause the steering shaft to break with resultant loss of steering.(inspect and replace steering shaft with improved design.)
DEFECT #2 - VEHICLE SPEED CONTROL
Posted on: 1979-10-12
Description
Consequence
Corrective Action
Notes
Possibility that a maladjusted cruise command bellows chain can interfere with the lever of the carburetor control shaft rod and hold the throttle in a partially open position.(install cruise command chain shield spring.)
DEFECT #3 - STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
Posted on: 1979-10-12
Description
Consequence
Corrective Action
Notes
Possible interference between the steering gear and the steering gear side sill adaptor.this interference could cause excessive stress on each of the steering gear box mounting bosses when the gear box mounting bolts are properly torqued.(replace steering gear to sill adaptor.)
DEFECT #4 - VEHICLE SPEED CONTROL
Posted on: 1979-10-12
Description
Consequence
Corrective Action
Notes
The ball chain may catch accidentally beneath the accelerator control rod bracket and hold the throttle roughly three-quarters open.(replace with revised accelerator control rod and bracket and new ball link chain.)