3 recalls found. |
DEFECT #1 - FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Posted on: 1979-10-12
Description
The involved vehicles may experience fuel leakage at the rubber hose connecting the fuel inlet tube to the carburetor filter. This leakage condition is due to insufficient insertion of the fuel tube into the hose or improper positioning of the hose clamp, causing the clamp to be crimped directly over the fuel tube bead.
Consequence
Corrective Action
Dealer will replace the existing fuel hose clamp with a spring-type clamp at the hose-to-fuel inlet tube connection, and adjust the connection where necessary, without charge.
Notes
Vehicle description: trucks and passenger vehicles equipped with 351 or 400 cidengines.system: fuel; fuel hose.consequences of defect: fuel leakage could lead to an underhood fire andinjuries to vehicle occupants from burns and smoke inhalation.note: gasoline odors may indicate a fuel leak is persent.
DEFECT #2 - VEHICLE SPEED CONTROL
Posted on: 1979-10-12
Description
Some of the involved vehicles may have defective carburetors in which, under certain circumstances, the secondary throttle plates may stick open.
Consequence
Corrective Action
Dealer will inspect and, if necessary, replace the carburetor at no charge to owner.
Notes
Vehicle description: passenger vehicles and light trucks equipped with 460 cidengines.system: throttle linkages; throttle lever.consequences of defect: in the event of throttle sticking, the vehicle maycontinue to accelerate after the accelerator pedal is released. Continuousacceleration could occur without warning and lead to a loss of vehicle controland an accident.note: the likelihood of the condition occurring can be reduced by avoiding fullor nearly full depressions of the accelerator pedal as during high accelerationor full power operations.
DEFECT #3 - STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
Posted on: 1979-10-12
Description
On the involved vehicles, the manual steering gears may contain steering gear recirculatory balls that could fracture. This fracturing is a result of improper heat-treatment during manufacture and can eventually cause increased steering effort.
Consequence
Corrective Action
The dealer will inspect and, if necessary, replace the ball bearings of the steering gear, without charge to owner.
Notes
Vehicle description: passenger vehicles and light trucks.system: steering; steering gear recirculatory balls.consequences of defect: under continued operation, loss of steering control,loss of vehicle control, and an accident could occur.note: increased steering efforts will be accompanied by an audible popping orgrinding noise and momentary steering hang-up. If any of these conditions areexperienced, the vehicle should not be operated.