3 recalls found. |
DEFECT #1 - SEAT BELTS:FRONT
Posted on: 1985-05-13
Description
Widespread lack of understanding about the operation of webbing sensitive and dual sensitive seat belts has lead to non-use of belts by a number of owners. Some belts retractors may jam, bind or lock. This may discourage the use of the safety belts. Consequence of defect: non-use of seat belts subjects occupants to risk of injury in event of an accident or sudden braking.
Consequence
Corrective Action
Instructins on proper belt usage and simple checks will be sent to owners and will replace any malfunctioning retractor.
Notes
Vehicle description:two door roadsters and coupes passenger cars.system: seat belts.
DEFECT #2 - VISIBILITY:WINDSHIELD WIPER/WASHER
Posted on: 1979-10-12
Description
There may be a malfunction in the windshield wiper system due to any of the following: (1) incorrect tightening of the wiper wheel boxes during vehicle assembly, (2) excessively high friction/drag of wiper blades or (3) water entry into windshield wiper motor.
Consequence
Corrective Action
Dealer will lubricate and retighten wipers and fit the wiper wheelboxes with spacers. A protective shroud will also be fitted over the wiper motor to prevent water entry.
Notes
Vehicle description: passenger vehicles.system: visual; windshield wiper.consequences of defect: failure of the windshield wiper system may occur,without warning. This would interfere with driver visibility in bad weather,and could lead to a vehicle accident.
DEFECT #3 - EXTERIOR LIGHTING:HEADLIGHTS
Posted on: 1979-10-12
Description
The headlamp motor could fail due to corrosion of the motor and limit switch assembly. Should the motor or the limit switch fail, the headlamp assembly could stick in either the up or down position.
Consequence
Corrective Action
Dealer will install an improved sealed limit switch or a new headlamp motor, if necessary, without charge to owner.
Notes
Vehicle description: passenger vehicles.system: electrical; headlamp motor.consequences of defect: should the headlamp switch become stuck in the downposition, decreased visibility during adverse weather or night drivingconditions could result in an accident.note: if motor or limit switch failure occurs, the headlamp assembly can beraised or lowered manually by rotating the knob situated below the headlampmotor; the underhood label and owners handbook contain instructions for thisprocedure.