3 recalls found. |
DEFECT #1 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN
Posted on: 1979-10-12
Description
The hub portion of the fan blade assembly could crack due to high stress levels generated during engine operating conditions. Eventually, the blade could break apart at the hub and blade pieces could be propelled into the engine. If the hood is open while the engine is running, the fragments would be free to fly from the vehicle.
Consequence
Corrective Action
Dealer will replace the fan blade assembly without charge to owner.
Notes
Vehicle description: passenger vehicles.system: engine cooling; fan blade assembly.consequences of defect: fan failure could result in damage to components in theengine area, or personal injury to bystanders if the hood is open at the time.note: the vehicle should not be serviced with the hood open and the enginerunning until the defect is corrected.
DEFECT #2 - WHEELS:LUGS/NUTS/BOLTS
Posted on: 1979-10-12
Description
The rear wheel mounting bolts on the affected vehicles, are brittle and therefore may fracture. This brittleness is due to improper heat treatment during manufacture. If the bolts break, the tire and wheel assembly may separate from the vehicle.
Consequence
Corrective Action
Dealer will inspect and, if necessary, will replace defective bolts on all axles and the ten rear axle wheel mounting bolts, free of charge.
Notes
Vehicle description: passenger vehicles.system: suspension; rear wheel mounting bolts.consequences of defect: if separation occurs under vehicle operation, loss ofvehicle control without prior warning and an accident could result.
DEFECT #3 - EQUIPMENT
Posted on: 2007-10-30
Description
Certain honeywell fram racing brand hp4 and hp8 oil filters that were manufactured from may 25, 2006, through september 14, 2007, and sold for use as replacement equipment for vehicles list above. The affected filters are marked with a date code a61451 through a72571 sequentially. The date code and part number appear on the filter housing. Fram racing hp4 and hp8 oil filters not bearing a date code in this range are not affected by this recall. The gasket of the oil filter becomes more pliable under high temperatures and pressures.
Consequence
This condition may cause inadequate sealing and loss of engine oil, possibly resulting in a fire.
Corrective Action
Honeywell will replace the affected oil filters free of charge. The recall began during november 2007. Owners can contact fram customer service toll-free at 1-800-890-2075.
Notes
Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.