|
|
Recalls for
1978 Van Con School Bus
|
2 recalls found.
|
DEFECT #1 - SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Posted on: 1979-12-12
Description
The involved vehicles do not conform to federal motor vehicle safety standard no. 209, seat belt assemblies. The knurl bar in the buckle does not adequately hold the webbing in place under load.
Consequence
Corrective Action
Seat belts will be inspected and, if necessary, a v-shaped metal insert of 16 gauge steel will be fitted over the buckle webbing guide and welded to the inside buckle frame.
Notes
Vehicle description: school buses.system: interior; seat belts.consequences of defect: the defective seat belt will not restrain an occupantduring a crash situation but allow him to travel forwards and possibly sustainserious personal injury. DEFECT #2 - SEAT BELTS:FRONT:ANCHORAGE
Posted on: 1981-06-18
Description
The involved school buses do not comply with federal motor vehicle safety standard no. 210, seat belt assembly anchorages, in that the seat belt anchorages were not spaced 6.5 inches apart.
Consequence
Corrective Action
The owner is asked to inspect his/her seat belt anchorage for the required 6.5 inch clearance. Those that do not have the required clearance will be corrected at no charge. The owner also has the option to bring his vehicle in to have the dealer inspect and make the necessary modifications. If the owner would like to reposition the seat belt anchorages himself, the dealer will send a retrofit kit consisting of the parts needed to make these corrections. This will be sent at no charge to owner.
Notes
Vehicle description: school buses.system: interior; seat belt anchorages.consequences of defect: seat belts that do not meet safety requirements may notprovide adequate passenger restraint in the event of an accident.