2 recalls found. |
DEFECT #1 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Posted on: 1986-09-12
Description
Inadequate fastening of the brackets to the frame rail for holding the hydraulic brake and gas return lines may allow flexing and possible chafing of the line. Consequence of defect: lines could wear through and rupture resulting in (1) leakage of gasoline which is a fire hazard and/or (2) loss of hydraulic fluid, causing loss of brakes to the rear axles which may result in an accident.
Consequence
Corrective Action
Install appropriate fasteners/brackets to secure the lines to the frame rail.
Notes
System: fastening for hydraulic brake line and gasoline return line.vehicle description: class a motorhomes built on chassis manufactured bygeneral motors corporation.
DEFECT #2 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Posted on: 1982-02-01
Description
The absence of a fastener may allow a flexible rubber brake hose to come into contact with the exhaust manifold. The rubber hose may melt and cause a loss of brake fluid and braking power to the rear axles of the vehicles.
Consequence
Corrective Action
Dealer will inspect the routing of the flexible rubber hose and, if necessary, secure the brake line at no cost to owner.
Notes
Vehicle description: motorhomes.system: service brakes; hydraulic lines, fittings.consequences of defect: partial loss of braking capability would result and anaccident could occur.note: the motorhome should not be used until the vehicle can be inspected andthe necessary modifications made.