2 recalls found. |
DEFECT #1 - SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
Posted on: 1982-06-08
Description
Clamp bolts installed on certain vehicles may contain cracks. Eventually these bolts may break through, causing separation of the ball joint from the steering knuckle.
Consequence
Corrective Action
Dealer will replace both ball joint stud clamp bolts without charge to owner.
Notes
Vehicle description: passenger vehicles.system: suspension; front suspension ball joint stud to steering knuckle clampbolts.consequences of defect: this condition would result in partial loss of frontwheel support, possibly causing loss of vehicle control and an accident.note: front wheel drive vehicles should not be hoisted from under the frontsuspension control arms.
DEFECT #2 - VEHICLE SPEED CONTROL
Posted on: 1981-09-28
Description
The automatic speed control switch may stick in the resume position restricting return movement. This will not allow the normal brake pedal operation to deactivate the system.
Consequence
Corrective Action
The shield portion of the resume slide lever in the speed control unit will be replaced without charge.
Notes
Vehicle description: passenger vehicles equipped with automatic speed controlsystems.system: electric power accessories; automatic speed control switch.consequences of defect: failure of the speed control to deactivate could causeloss of vehicle control and an accident.note: manufacturer advises disconnection of the speed control device to preventits use prior to having it repaired.