2 recalls found. |
DEFECT #1 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Posted on: 1985-12-02
Description
The routing of brake lines brought the line close to an area used to fasten the seat socket support structure to the chassis. The fastening of seat support is done with bolts and when the bolts are tightened the free end of the bolts pinches one of the brake lines against the chassis frame rail. This causes a reduction in the brake line which reduces the volume of fluid passing through the line. Consequence of defect: the reduced volume of fluid affects the efficiency of the brake system. Also the brake line may crack causing loss of fluid line. In either case, a longer stopping distance would be required when maximum brake efficiency is needed. Operation of a vehicle with damaged brakes could lead to a vehicle crash.
Consequence
Corrective Action
Inspect and replace the affected brake line with a new part.
Notes
System: brake line. Vehicle description: kurbmaster body built on a ford ln 700 chassis.
DEFECT #2 - FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Posted on: 1987-03-30
Description
Clamp which secures the fuel filler hose to the body is missing.
Consequence
Hose could sag onto rear spring wearing a hole in thehose; this could allow fuel to spill onto ground while filling or drivingtruck.
Corrective Action
Install missing clamp and replace filler hose if it has been rubbed by spring.
Notes
System: fuel filler hose.vehicle description: truck bodies mounted on ford e 350 chassis.