4 recalls found. |
DEFECT #1 - SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Posted on: 1995-05-24
Description
The front safety belt buckle release buttons can break. These red plastic release buttons are marked press. If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
Consequence
The safety belts would not provide adequate protection to an occupant in a vehicle crash.
Corrective Action
Owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating properly by inserting each latch plate into its buckle, tugging on the belt to make sure the latch is securely locked, and then pressing the release button. The latch plate should pop out of the buckle when the button is pressed. If either release button shows a sign of breaking or cracking or if either buckle fails to operate properly, owners should promptly contact their authorized dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. The manufacturer is developing a remedy designed to prevent failure of the buttons that are not currently broken.
Notes
System: interior; seat belts; belt buckles.vehicle description: passenger vehicles equipped with safety belts made by takata corporation. Dl, gl and loyale models involve only 3-door coupes, other models in these series are not involved.note: the manufacturer has not supplied the model vehicles included in this campaign.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time, please contact subaru at 1-800-782-2783. Also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
DEFECT #2 - POWER TRAIN:MANUAL TRANSMISSION
Posted on: 1989-03-06
Description
Due to the design of the transmission case dipstick and the fluid level checking method, there may be insufficient lubrication of the 4 wheel drive extension housing bearing.
Consequence
This could cause bearing seizure and possible rear wheellockup, which could result in an accident.
Corrective Action
Install modified dipstick and insert information in owners manual on the correct fluid level checking procedures.
Notes
System: transmission fluid.vehicle description: five speed manual transmission, four wheel drive vehicles.
DEFECT #3 - SEAT BELTS
Posted on: 1988-04-11
Description
Omission of information specified by fmvss 210 from owner manual.
Consequence
Fails to meet requirements of fmvss 210 regarding childrestraint systems.
Corrective Action
Adhesive backed inserts will be furnished with the correct information.
Notes
System: owner manual/fmvss 210.vehicle description: passenger cars.
DEFECT #4 - ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR
Posted on: 1988-03-18
Description
Insufficient clearance between the relocated alternator wiring and the solenoid hose alternator wiring stay bracket can cause wire chaffing and an electrical short.
Consequence
An electrical short could result in smoke and possiblyan engine compartment fire.
Corrective Action
Modify by removing the solenoid hose/alternator stay bracket.
Notes
System: alternatorvehicle description: 4 wheel drive vehicles equipped with an accessory subaruair conditioning system.