3 recalls found. |
DEFECT #1 - SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
Posted on: 1990-02-22
Description
Improperly machined brake pedal to push rod pivot bolts have a tendency to work themselves loose from the retaining nut, which could lead to brake failure.
Consequence
If the nut worked itself loose, pivot bolt would fall out, leaving the brake pedal assembly detached from the brake booster reaction rod, which would disable the hydraulic brake system and lead to an accident.
Corrective Action
Replace pivot bolt and nut with upgraded bolt and nut lock.
Notes
System: brakes ; pedal push rod bolts.vehicle description: multi-purpose vehicles.
DEFECT #2 - EQUIPMENT:OTHER:LABELS
Posted on: 1990-02-01
Description
Tire inflation pressure recommended for rear tire will not support gross axle weight rating; also, wheel rims are not stamped dot.
Consequence
During heavy towing or hauling of heavy loads, inflation of rear tires would present a risk of tire failure and vehicles would not comply with fmvss 120.
Corrective Action
Provide correct tire inflation information on a new combined certification - tire information label, and stamp wheel rims with dot.
Notes
System:rear axle / fmvss 120.vehicle description: multi-purpose passenger vehicle.
DEFECT #3 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
Posted on: 1990-07-31
Description
Design defect of the sealing grommet causes inadequate sealing of fuel filler neck at the fuel tank, which may result in fuel leakage.
Consequence
Leaking fuel could catch fire if an ignition source is
Corrective Action
Install replacement fuel tank and hardware.
Notes
System: fuel tank filler neck.vehicle description: multi-purpose passenger vehicle.