4 recalls found. |
DEFECT #1 - VEHICLE SPEED CONTROL
Posted on: 1993-05-27
Description
Due to heat effects, the throttle bushing located on the accelerator control cable, can fatigue and break, causing the throttle linkage to separate.
Consequence
If the throttle linkage separates, the engine will returnto idle speed, and remain at idle, with no acceleration ability. Loss of enginespeed without prior warning could lead to loss of vehicle control and anaccident.
Corrective Action
Replace the throttle bushing with a new bushing made from more heat-resistant materials.
Notes
System: fuel system; throttle linkages.vehicle description: passenger cars.
DEFECT #2 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS
Posted on: 1990-02-28
Description
Bolts used for the brake strut support do not meet specifications and may break.
Consequence
The failure of the bolts may result in a deterioration of vehicle steering and braking which could result in loss of control and an accident.
Corrective Action
Replace hex nut bolts with bolts that meet specifications.
Notes
System: brake strut support hex nut bolts.vehicle description: passenger cars.
DEFECT #3 - TIRES:SIDEWALL
Posted on: 1990-05-17
Description
Left front and left rear tires may have been damaged by a worn chain drive of the conveyor system.
Consequence
Damaged or cut tires could fail during use and result in an accident with possible injuries.
Corrective Action
Replace damaged tires with tires of the same brand name.
Notes
System: tires.vehicle description: passenger cars; 300sl, 500sl.
DEFECT #4 - EQUIPMENT:AIR CONDITIONER
Posted on: 1990-05-17
Description
Under certain operating conditions, the plastic cover of the preresistor for the auxiliary fan may melt, possibly igniting the preresistor.
Consequence
This results in an underhood fire that would be hazardous to occupants.
Corrective Action
Replace the preresistor with version having a metal cover.
Notes
System: air conditioning -preresistor for auxiliary fan.vehicle description: passenger cars; 300e, ce, te, d , e4m, te4m.warning: the climate control system should be operated in the ec (economy) mode until the preresistor is changed.