3 recalls found. |
DEFECT #1 - SUSPENSION:FRONT
Posted on: 1994-06-23
Description
The offset toe adjusting pin can fracture under conditions such as torsional loads, flexing motion, impact loads, and overtorquing.
Consequence
This can result in loss of vehicle steering control andan accident.
Corrective Action
Dana will pay for replacement and labor costs of the adjustment pin without charge to the installing facility and the vehicle owner. These pins should be replaced by a ford original equipment pin assembly. Owner or installer inquiries concerning this recall campaign should contact dana service center at 1-800-248-9606.
Notes
System: suspension; independent front.equipment description: offset rear toe adjusting pin.note: if you have any problems with the pin replacement reimbursement program,please contact dana service center at 1-800-248-9606. Also, contact thenational highway traffic safety administration's auto safety hotline at1-800-424-9393.
DEFECT #2 - SEATS
Posted on: 1994-04-01
Description
The lock plate of the driver side inboard seat track adjusters were manufactured with an unauthorized modification to the fabrication process which causes the seat not to fully engage in certain seating positions near the mid-point of the seat track travel.
Consequence
In the event of a crash the seat can move, which would result in reduced occupant protection.
Corrective Action
Dealers will replace the driver side inboard seat track.
Notes
System: interior systems; seat tracks and anchors.vehicle description: passenger vehicles.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and freeof charge or the remedy does not correct the defect or noncompliance, please contact ford service center at 1-800-392-3673. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
DEFECT #3 - EXTERIOR LIGHTING
Posted on: 2006-03-23
Description
Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Consequence
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Corrective Action
Pro-a motors will notify owners and offer to repurchase the lamps. The recall began on april 3, 2006. Owners may contact pro-a motors at 323-838-2988.
Notes
This recall only pertains to pro-a motors aftermarket lamps and has no relation to any original equipment installed on the listed passenger vehicles.for more information on the lamp model numbers, click on document search and view document titled lamp model numbers.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.