3 recalls found. |
DEFECT #1 - SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION:LINES AND FITTINGS
Posted on: 1998-10-15
Description
Vehicle description: class 8 heavy duty trucks. The air suspension control valve supply line was not plumbed through an air pressure protection valve. In the event of a failure, there would be loss of air pressure in the 'b' system air reservoir that supplies air pressure for the front steer axle brakes.
Consequence
This condition would result in increased stopping distances.
Corrective Action
Dealers will install the necessary air pressure protection valve.
Notes
Owner notification began during november 1998. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1-800-528-6586.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
DEFECT #2 - SUSPENSION:REAR:SPRINGS:AIR SUSPENSION SYSTEM
Posted on: 1996-02-13
Description
The rear suspension axle retention plate can break under normal use, affecting axle alignment.
Consequence
This condition could result in loss of rear axle stability affecting vehicle directional control and increasing the potential for a vehicle crash.
Corrective Action
Dealers will remove and replace the axle retention clip plates on affected vehicles.
Notes
System: suspension; single axle; rear; air suspension. Vehicle description: heavy duty class 8 vehicles. Note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time, should contact volvo gm heavy truck at 1-800-528-6586. Also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
DEFECT #3 - SERVICE BRAKES, AIR
Posted on: 1996-06-11
Description
The traction solenoid exhaust can be obstructed due to inadequate drainage and a build-up of road contamination between the mounting bracket and the solenoid housing. The obstructed exhaust prevents the relay valve control air pressure from venting after a differential braking traction event.
Consequence
This condition would keep the rear axle service brakes applied without any brake pedal movement by the driver increasing the risk of a vehicle accident.
Corrective Action
Dealers will remove the suspect valve and install a new valve that has a modified solenoid housing which will allow for sufficient drainage and a new valve mounting bracket with increased height to reduce entry of contamination.
Notes
System: brakes; air systems. Vehicle description: class 8 heavy duty trucks equipped with a bendix atr traction relay valve. Note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time, should contact volvo gm heavy truck at 1-800-528-6586. Also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.