Recalls for your 2001 Peterbilt 378

Recalls for 2001 Peterbilt 378

RSS Feed


5 recalls found.
All Peterbilt Recalls
Peterbilt 378

Moonayyy posted a photo:

Peterbilt 378

DEFECT #1 - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE


Posted on: 2002-01-25
Description
On certain heavy duty trucks equipped with meritor wabco pneumatic anitlock brake system (abs) valve packages, the assembly bolts on these valve packages were not tightened correctly.

Consequence
Bolts torqued below specification will not reliably prevent air leakage at the affected abs valve package interface joints once the component begins normal vehicle operation.  If air leaks develop at any of the abs valve package interface joints, brake system pressure reductions could occur during braking or normal operation with units equipped with the traction control option, potentially extending stopping distances, possibly resulting in a vehicle crash.

Corrective Action
Dealers will tighten the fasteners to the proper specification.  Owner notification began february 15, 2002.  Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4201.

Notes
Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

DEFECT #2 - STEERING


Posted on: 2001-03-08
Description
Vehicle description: heavy duty trucks.  The bolts used to secure the steering shaft can fail.

Consequence
This condition can result in the loss of vehicle control without warning, increasing the risk of a crash.

Corrective Action
Dealers will replace the defective bolts.  Owner notification began april 2, 2001.  Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.

Notes
Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

DEFECT #3 - SEAT BELTS:FRONT:ANCHORAGE


Posted on: 2001-02-28
Description
Vehicle description: class 7 and class 8 vehicles.  These vehicles do not comply with the requirements of fmvss no.  207, seating system, and no.  210, seat belt assembly anchorages.  Some fasteners used to attach the shoulder belt anchor bracket to the cab structure were omitted during production.

Consequence
In the event of a crash, the shoulder belt anchorage may not properly restrain the seat occupant, increasing the risk of personal injury.

Corrective Action
Dealers will add the necessary fasteners.  Owner notification began march 19, 2001.  Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.

Notes
Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

DEFECT #4 - LATCHES/LOCKS/LINKAGES:DOORS:LATCH


Posted on: 2001-06-05
Description
Vehicle description: heavy duty trucks.  A change in the internal linkage of certain cab doors has created a possible binding condition.

Consequence
If the linkage binds, full engagement of the door latch may not occur, allowing the door to open inadvertently.

Corrective Action
Dealers will modify the door linkage to correct the potential of binding.  Owner notification began june 22, 2001.  Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.

Notes
Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

DEFECT #5 - SUSPENSION:FRONT:HUB


Posted on: 2003-04-15
Description
On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.

Consequence
Seizure of the bearings can cause wheel separation or wheel end fire.

Corrective Action
Dealers will replace all front axle hubs.  Notification began july 16, 2003.  The manufacturer has advised us that parts will not be available until september 2003.  Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.

Notes
Kenworth recall no.  03kw2 and peterbilt recall no.  303-a.customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).