4 recalls found. |
DEFECT #1 - POWER TRAIN:AUTOMATIC TRANSMISSION
Posted on: 2007-03-16
Description
On certain trucks, the wiring, parts, or transmission programming required for the auto neutral feature to function as designed were either not installed, connected, or programmed properly.
Consequence
If any of these conditions exists, the transmission will not automatically shift into neutral when left in drive with the parking brake set engaged. The vehicle could move without warning increasing the risk of a crash.
Corrective Action
Dealers will inspect the affected vehicles to ensure the auto neutral feature functions properly and, if needed, will make the necessary repairs free of charge. The recall began on may 9, 2007. Owners may contact kenworth at 425-828-5440.
Notes
Kenworth recall no. 07kw3.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
DEFECT #2 - SUSPENSION
Posted on: 2005-04-29
Description
On certain heavy duty class 8 trucks, the suspension has transverse beam castings that may fracture under normal loads. If a casting breaks when the vehicle is traveling on a roadway there is the potential for pieces of the casting to become projectiles and the suspension's transverse beam may drop down low enough to contact the road surface.
Consequence
This could cause sparks that could potentially ignite and cause a fire.
Corrective Action
Dealers will inspect and replace the defective transverse beam assemblies free of charge. The recall began on june 10, 2005, with letters being mailed to peterbilt owners; and on june 17, 2005, for kenworth owners. Owners may contact peterbilt at 940-591-4201 or kenworth at 425-828-5440.
Notes
Peterbilt recall no. 405-b and kenworth recall no. 05kw3.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #3 - ELECTRICAL SYSTEM:WIRING
Posted on: 2004-12-10
Description
On certain trucks, the power feed harness p92-1993 terminals were not properly crimped.
Consequence
This could lead to intermittent power loss affecting the electrical system and possibly result in a fire.
Corrective Action
Dealers will replace the harness. The recall began january 13, 2005. Owners should contact kenworth at 1-425-828-5440.
Notes
Paccar/kenworth recall no. 04kw8.customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
DEFECT #4 - ENGINE AND ENGINE COOLING
Posted on: 2005-12-22
Description
On certain tractors equipped with caterpillar diesel engines, the variable valve actuation oil line may wear against the sharp edge of the cylinder head if not positioned correctly.
Consequence
The oil line may be cut on the cylinder head causing an oil leak and a possible fire.
Corrective Action
Caterpillar, in conjunction with paccar, will be conducting the owner notification and remedy for this campaign free of charge. Owners may call caterpillar at 309-675-6496, kenworth at 425-828-5440, or peterbilt at 940-591-4201.
Notes
Kenworth recall no. 05kw7 and peterbilt recall no. 1205e.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236(tty 1-800-424-9153), or go to http://www.safercar.gov.