3 recalls found. |
DEFECT #1 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL
Posted on: 2006-12-12
Description
On certain low cab forward chassis trucks, the unsealed injection pressure regulator connector is exposed to the outside environment due to its location on the back of the engine and the engine's location in the vehicle. The connector has a heat insulation sleeve that may retain water around the connector.
Consequence
Over time, the collected water may potentially corrode the connector leads resulting in various engine performance concerns including; running rough, difficult or unable to be started, or engine stall increasing the risk of a crash.
Corrective Action
Dealers will replace the injection pressure regulator connector, inspect for corrosion, and replace the heat insulation. If corrosion is present, the connector will be replaced. If corrosion is not present, dielectric grease will be applied free of charge. The recall began on february 13, 2007. Owners may contact ford at 1-800-392-3673.
Notes
Ford recall no. 06s47. Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #2 - STRUCTURE
Posted on: 2005-11-16
Description
On certain medium duty chassis cabs, the cab entry step platforms on either side of the vehicle may crack during normal use.
Consequence
A person stepping or standing on the platform when it breaks could be injured.
Corrective Action
Dealers will install reinforcement brackets on both cab entry step platforms. The recall began on december 1, 2005. Owners may contact ford at 1-800-343-5338.
Notes
Ford recall no. 05s41. Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #3 - TRAILER HITCHES
Posted on: 2008-07-29
Description
Knapheide is recalling 108 my 2006-2008 pro series truck beds equipped with an icc bumper which included a provision for a ball hitch. There may be an insufficient weld attaching the hitch channel to the supporting structure.
Consequence
This could result in bending of the hitch channel or the hitch could be pulled off the vehicle, increasing the risk of a crash.
Corrective Action
Knapheide will offer two remedies to its customers: (1) for those customers who do not use the hitch, the hitch will be removed from the truck bed and replaced with an icc bumper; or (2) for those customers who need a hitch, a receiver hitch assembly will be added to the existing hitch assembly and all suspect weld joints will be re welded. The recall began on august 15, 2008. Owners may contact knapheide at 1-877-473-5763.
Notes
Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.