3 recalls found. |
DEFECT #1 - SUSPENSION
Posted on: 2006-10-11
Description
On certain trucks equipped with chalmers rear suspensions, the adjustable torque rod end castings may be brittle. A brittle rod end casting may fracture without warning, causing the vehicles' rear axles to become misaligned.
Consequence
This misalignment can cause the vehicle to lose directional stability at speeds that may result in a vehicle crash.
Corrective Action
Dealers will inspect the vehicles to determine if they were manufactured with a suspect torque rod end. If a suspect torque rod end is found, the entire torque rod will be replaced. The recall began on october 6, 2006. Owners may contact international at 1-800-448-7825.
Notes
International recall no. 06509.customers can also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #2 - PARKING BRAKE:CONVENTIONAL:AIR
Posted on: 2006-06-28
Description
On certain trucks equipped with sr-7 bendix brake valves, the check valve inside the valve cavity may not properly set, causing internal air leakage. If the check valve does not properly seat, the resulting leakage can cause a delay in the application of the spring brakes to park the vehicle after operator pulls the dash valve button.
Consequence
The delayed parking brake application can occur without warning, leading to unintended vehicle rollaway increasing the risk of a crash.
Corrective Action
Dealers will inspect the valves and replace it free of charge. The recall began on july 21, 2006. Owners may contact international at 1-800-448-7825.
Notes
International recall no. 06506.customers can also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #3 - PARKING BRAKE
Posted on: 2007-07-24
Description
On certain 6x4 or 6x6 trucks with air brakes or tractors with air brakes and equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Consequence
This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
Corrective Action
International is working with bendix to repair these vehicles (please see 07e-037). Bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. The recall began on september 28, 2007. Owners may contact bendix at 440-329-9000 and international at 1-800-448-7825.
Notes
International recall no. 07511.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.