4 recalls found. |
DEFECT #1 - SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY
Posted on: 2007-04-25
Description
On certain trucks, one or both rear axle housings may contain thinner material than what is necessary for normal vehicle operation. Over time, this thinner material may result in a fatigue failure of the rear axle housing, possibly in the location of the brake flange.
Consequence
A crack in the brake flange location of the rear axle housing may result in a wheel end lockup or wheel separation possibly resulting in property damage, personal injury, or death.
Corrective Action
Dealers will inspect the vehicle's rear axles and, if necessary, replace the axle housings. The recall began on may 18, 2007. Owners may contact international at 1-800-448-7815.
Notes
International recall no. 07505.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
DEFECT #2 - FUEL SYSTEM, DIESEL
Posted on: 2007-04-25
Description
On certain trucks equipped with davco fuel pro 382 heated fuel filters, when the key is in the 'on' position, the pre-heater, located in the fuel filter base, is energized.
Consequence
If this pre-heater is energized while maintenance is being performed on the fuel filter, diesel fuel could ignite within the filter housing. A fire within the fuel filter housing may spread possibly resulting in property damage or personal injury.
Corrective Action
Dealers will inspect the fuel filters and fuel heaters and, if necessary, will replace the fuel heater. The recall began on may 11, 2007. Owners may contact international at 1-800-448-7825.
Notes
International recall no. 07506.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
DEFECT #3 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL
Posted on: 2007-08-22
Description
On certain heavy duty class 8 trucks built with cummins ism c876 engines, the electronic control module fails to recognize inputs of the vehicle electronic control unit or from a driver actuated dash switch thereby increasing the risk of unintended (or unexpected) elevated exhaust temperatures.
Consequence
While this condition does not involve a risk of fire in the vehicle itself, it could present a fire hazard in a situation where the vehicle's exhaust is in close proximity to materials or substances that can melt, burn, or explode.
Corrective Action
Cummins, in conjunction with international, will conduct the remedy campaign. Cummins will install new ecm software. Owners can contact cummins at 1-800-343-7357 or international at 1-800-448-7825.
Notes
International recall no. 07512.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #4 - PARKING BRAKE
Posted on: 2007-07-24
Description
On certain 6x4 or 6x6 trucks with air brakes or tractors with air brakes and equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Consequence
This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
Corrective Action
International is working with bendix to repair these vehicles (please see 07e-037). Bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. The recall began on september 28, 2007. Owners may contact bendix at 440-329-9000 and international at 1-800-448-7825.
Notes
International recall no. 07511.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.