3 recalls found. |
DEFECT #1 - ENGINE AND ENGINE COOLING
Posted on: 2009-12-30
Description
Bmw is recalling certain model year 2008 through 2010 f650 gs and f800 gs motorcycles manufactured between january 2008 and december 2009. During engine operation, a vacuum is created in order to draw fresh air into the canister. This air then mixes with the fuel vapors captured by the canister, and is subsequently combusted. Due to the routing of the ventilation hose, water near the end of the hose could be drawn into the charcoal canister.
Consequence
Water could flow into the canister causing a stalling condition increasing the risk of a crash.
Corrective Action
Dealers will inspect and add an additional hose and route it such that the present defect is prevented. This remedy will be performed free of charge. The safety recall began on may 13, 2010. Owners may contact bmw at 1-800-831-1117.
Notes
Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
DEFECT #2 - POWER TRAIN
Posted on: 2010-06-18
Description
Bmw is recalling certain model year 2008 and 2009 f650 gs and f 800 gs motorcycles manufactured from september 27, 2007 through march 30, 2009. The drive chains may not have been produced to specification. As a result, over time the drive chain could break.
Consequence
If the broken chain becomes trapped between the rear wheel and the frame, the rear wheel could lock up, possibly resulting in a crash.
Corrective Action
Bmw will notify owners and dealers will replace the drive chain and sprockets on the affected motorcycles free of charge. The safety recall began on august 30, 2010. Owners may contact bmw at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #3 - POWER TRAIN:AXLE ASSEMBLY
Posted on: 2009-03-18
Description
Bmw is recalling 754 my 2009 f800 gs vehicles. The axle shaft wall thickness may not have been manufactured according to specifications.
Consequence
If the wall thickness was not sufficient, the axle shaft could deform and could break increasing the risk of a crash.
Corrective Action
Dealers will inspect the front wheel quick-release axle and replace it with an improved axle free of charge. The recall is expected to begin during june 2009. Owners may contact bmw at 1-800-831-1117.
Notes
Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .