3 recalls found. |
DEFECT #1 - EQUIPMENT
Posted on: 2011-02-01
Description
Terex is recalling certain model year 2008-2010 aerial device and digger derrick utility vehicles manufactured from june, 2008 through november, 2010. The lanyard anchors were not heat treated properly and may fracture.
Consequence
Failure of the lanyard anchor could occur increasing the risk of personal injuries or death.
Corrective Action
Dealers will replace the lanyard anchors with a new part free of charge. The safety recall began on february 11, 2011. Owners may contact terex at 1-605-884-3892.
Notes
Terex safety recall no. Cb593.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
DEFECT #2 - STRUCTURE
Posted on: 2013-03-13
Description
Terex south dakota, inc. (terex) is recalling certain model year 1999-2012 xl4000 digger derrick utility trucks. The shims and spacers used to adjust the length of the hydraulic cylinder may give, causing the rod eye and threads to fatigue while lifting loads.
Consequence
The hydraulic cylinder may separate from the digger derick arm, allowing it to collapse without warning, increasing the risk of injury to the operator or those nearby.
Corrective Action
Terex will notify owners, and dealers will inspect and replace the rod eye and threads, as necessary. The existing shims and spacer will be replaced with a hardened spacer. All repairs will be made at no charge to the owner. The recall began on may 23, 2013. Owners may contact terex at 1-605-882-4000.
Notes
Terex's recall campaign number is sn602.owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #3 - EQUIPMENT
Posted on: 2013-03-13
Description
Terex south dakota, inc. (terex) is recalling certain model year 1999-2012 xl4000 digger derrick utility trucks. The shims and spacers used to adjust the length of the hydraulic cylinder may give, causing the rod eye and threads to fatigue while lifting loads.
Consequence
The hydraulic cylinder may separate from the digger derick arm, allowing it to collapse without warning, increasing the risk of injury to the operator or those nearby.
Corrective Action
Terex will notify owners, and dealers will inspect and replace the rod eye and threads, as necessary. The existing shims and spacer will be replaced with a hardened spacer. All repairs will be made at no charge to the owner. The recall began on may 23, 2013. Owners may contact terex at 1-605-882-4000.
Notes
Terex's recall campaign number is sn602.owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.