5 recalls found. |
DEFECT #1 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
Posted on: 2011-05-19
Description
Navistar is recalling certain model year 2011-2012 ic ac, be, ce, hc and international 4300, and terrastar commercial trucks manufactured from february 25, 2010, through april 4, 2011, and equipped with a maxxforce 7 engine. A cap on the return fuel valve may fall off allowing air to be drawn into the fuel system possibly resulting in engine hard start, no start, or stall conditions.
Consequence
Engine stall on the roadway increases the risk of a vehicle crash.
Corrective Action
Navistar will notify owners and dealers will replace the return fuel valve cap free of charge. The safety recall began on july 18, 2011. Owners may contact navistar at 1-800-448-7825.
Notes
Navistar's safety recall no. 11507.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
DEFECT #2 - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE
Posted on: 2012-02-13
Description
Navistar is recalling certain model year 2012-2013 ic bus ce-c, hc, and international 9400 and certain model year 2011 through 2013 international durastar, paystar, workstar, transtar, lonestar, prostar, 9200, and 9800, and certain model year 2013 international 9900, vehicles, manufactured from december 2, 2010, through january 26, 2012, and equipped with bendix atr-6 traction relay valves. In extremely cold conditions, these bendix relay valves may potentially develop internal leakage. Internal leakage can lead to air pressure being delivered to affected primary or secondary brakes causing continuous brake application.
Consequence
Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. Unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. Also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.
Corrective Action
Navistar will notify owners, and dealers will provide a temporary repair until bendix develops a permanent remedy. This service will be performed free of charge. The safety recall began on april 10, 2012. Owners may contact navistar at 1-800-448-7825.
Notes
Navistar's recall number is 12502.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #3 - POWER TRAIN:AXLE ASSEMBLY
Posted on: 2011-12-20
Description
Navistar is recalling certain model year 2012 international durastar and ic bus hc heavy trucks and buses manufactured from february 10, 2011, through february 18, 2011,that were equipped with a meritor mfs08 series non-drive front steer axle. During the assembly process, the steering attachment bolts may have been insufficiently torqued.
Consequence
Insufficient torque of the steering arm bolts may result in bolt fatigue and fracture and/or arm separation, thereby potentially resulting in loss of steering control, increasing the risk of a crash.
Corrective Action
Navistar will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on february 10, 2012. Owners may contact navistar at 1-800-448-7825.
Notes
Navistar's recall campaign number is 11521.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #4 - POWER TRAIN:AUTOMATIC TRANSMISSION
Posted on: 2014-02-10
Description
Navistar inc. (navistar) is recalling certain model year 2010-2011 ic bus 3200, model year 2012 and 2014 ic bus ce and model year 2011-2013 ic bus hc transit buses and model year 2008-2013 international 4300 and model year 2013 international workstar commercial trucks equipped with eaton hybrid automated transmissions. The software controlling the affected transmissions may improperly raise the vehicle's engine speed during downshifts without the driver's input.
Consequence
The increase in engine speed may result in unintended acceleration, increasing the risk of a crash.
Corrective Action
Navistar will notify owners and eaton authorized service facilities will update the hybrid control module software version, free of charge. The recall began on may 28, 2014. Owners may contact navistar at 1-331-332-1590.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #5 - ELECTRICAL SYSTEM:WIRING
Posted on: 2015-06-22
Description
Navistar, inc. (navistar) is recalling certain model year 2010-2014 international durastar trucks manufactured may 13, 2009, to june 24, 2013, 2011-2012 international workstar trucks manufactured november 30, 2010, to september 26, 2011, and 2010-2014 ic bus hc transit buses manufactured november 19, 2009, to april 24, 2013. The affected vehicles may have an improperly routed engine grid heater power feed cable which can result in the cable contacting the metal edge on the cab.
Consequence
If the cable contacts the metal edge of the cab, it may cause an electrical short, increasing the risk of a fire.
Corrective Action
Navistar will notify owners, and dealers will secure the power feed cable so that it cannot contact the cab, free of charge. The recall began on august 3, 2015. Owners may contact navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15514.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.