Recalls for your OEM Parts Terex Tlm

Recalls for OEM Parts Terex Tlm

RSS Feed


3 recalls found.
All Terex Recalls
Sorry, could not fetch this feed! (items)

DEFECT #1 - EQUIPMENT


Posted on: 2006-08-07
Description
Certain terex aerial devices, tlp, tlm, and hr units, equipped with holding valves with caca and cwck model desigination produced with february 1 to april 10, 2006 date codes.  A seal in the holding valve can fail and leak.

Consequence
If seal leakage occurs, the boom may drift.  A drifting platform can result in serious injury or death.

Corrective Action
Terex will notify owners and replace the defective holding valves free of charge.  The recall began on august 31, 2006.  Owners may contact terex at 605-882-4000.

Notes
Terex recall no.  Cb570.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

DEFECT #2 - EQUIPMENT


Posted on: 2008-09-15
Description
Terex telelect is recalling 142 tlm series aerial devices built from january 2000 through march 2003.  The pin retaining bolts that holds pivot pins or cylinder attaching pins in place can break due to lack of lubrication of the pin.

Consequence
Failure of the retainer bolts allows the pin to move out of position and the boom to fall, possibly resulting in personal injury.

Corrective Action
Terex will notify owners and replace the pin retainer fasteners free of charge.  The recall began on september 26, 2008.  Owners may contact terex utilities warranty department by calling 1-605-882-4000.

Notes
Terex's recall no.  Cb582.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

DEFECT #3 - EQUIPMENT


Posted on: 2009-04-27
Description
Terex telelect, inc.  Certain tlm series aerial devices which used mounting plate 471499 installed on utility trucks from december 2002 through november 2007.  The plate can develop a crack at the base of the pedestal to the truck frame.  

Consequence
If the mounting plate fails, the boom and platform may fall, possibly resulting in serious injury or death.

Corrective Action
Terex will notify owners and will reinforce the mounting plates free of charge.  The recall is expected to begin during may 2009.  Owners may contact terex utilities warranty by calling 1-605-884-3892.

Notes
Terex's recall no.  Cb585.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .