|
|
Recalls for
1976 International Harvester School Bus
|
2 recalls found.
|
DEFECT #1 - SUSPENSION:REAR:SPRINGS:LEAF SPRING ASSEMBLY:HANGER/BRACKET
Posted on: 1979-10-12
Description
The bolts that anchor forward mounting brackets for the rear springs may loosen.
Consequence
Corrective Action
The dealer will replace the original bolts with improved bolts and nuts.
Notes
Vehicle description: school buses and truck chassis.system: suspension; mounting bracket.consequences of defect: continued operation with loose bolts could cause thebrackets to separate from the frame, causing a fishtailing effect of the rearend of the vehicle. This may result in a vehicle accident. DEFECT #2 - PARKING BRAKE
Posted on: 1979-10-12
Description
The parking brake lever mounting bracket may bend and break due to repeated applications of the parking brake. This will create a tearing force at the bolt mounting area of the bracket.
Consequence
Corrective Action
Bent or cracked mounting brackets will be replaced and a reinforcement strap will be added to limit the lift and pull force on the bracket. This will be done without charge to owner.
Notes
Vehicle description: heavy trucks and school buses.system: parking brakes; hand brake lever bracket.consequences of defect: the parking brake could fail. If a vehicle is parked onan incline, with inoperative parking brakes, it could roll free and causeinjury and damage to persons and property.note: until the vehicle can be inspected, it should be parked with the wheelsturned in towards the curb. The wheels should be blocked, and the vehicleparked in the lowest gear. Vehicle should not be left unattended with theengine running and a normal parking brake hand lever adjustment should bemaintained. Do not adjust to higher than normal force, as this increases thepossibility of failure.