2 recalls found. |
DEFECT #1 - ENGINE AND ENGINE COOLING:ENGINE
Posted on: 1979-10-12
Description
The threaded insert for the oil filter retaining bolt may not be strong enough to withstand the stress caused by temperature and pressure, particularly in the event that the oil filter bolt has been overtightened.
Consequence
Corrective Action
Dealer will install a different type oil filter bolt of increased strength.
Notes
Vehicle description: motorcycles.system: engine; oil filter.consequences of defect: if the bolt breaks, the oil filter bolt will come off,allowing oil to fall on the road surface. This condition may cause loss of tiretraction and possible vehicle accident.
DEFECT #2 - ENGINE AND ENGINE COOLING:ENGINE
Posted on: 1979-10-12
Description
If the countershaft oil seal is subjected to extreme oil pressure variation, the countershaft oil seal may be split, allowing oil to leak. Leaking oil can come into contact with the rear tire, which can result in traction reduction.
Consequence
Corrective Action
Countershaft oil seal will be replaced and a modified oil path body will be installed to reduce the oil pressure at the countershaft oil seal. Repairs will be performed at no charge to owner.
Notes
Vehicle description: motorcycles.system: engine and engine cooling; counter shaft oil seal.consequences of defect: reduced traction can result in loss of vehicle controland a vehicle accident.note: do not ride your motorcycle if there are signs of engine oil leakage atthe transmission countershaft. Ride at low speeds if you must ride vehicle todealer for repairs.