3 recalls found. |
DEFECT #1 - SUSPENSION:FRONT:CONTROL ARM:LOWER ARM
Posted on: 1989-04-13
Description
Front suspension crossmember may corrode and fail at lower control arm rear pivot mounts if operated where salt is used to aid in snow removal.
Consequence
Control arm could detach from the crossmember, adverselyaffecting directional stability, which could result in an accident.
Corrective Action
Install attachment reinforcement brackets to prevent control arm detachment as a result of corrosion weakening.
Notes
System: front suspension crossmember.vehicle description: passenger cars.
DEFECT #2 - SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
Posted on: 1982-06-08
Description
Clamp bolts installed on certain vehicles may contain cracks. Eventually these bolts may break through, causing separation of the ball joint from the steering knuckle.
Consequence
Corrective Action
Dealer will replace both ball joint stud clamp bolts without charge to owner.
Notes
Vehicle description: passenger vehicles.system: suspension; front suspension ball joint stud to steering knuckle clampbolts.consequences of defect: this condition would result in partial loss of frontwheel support, possibly causing loss of vehicle control and an accident.note: front wheel drive vehicles should not be hoisted from under the frontsuspension control arms.
DEFECT #3 - SERVICE BRAKES, HYDRAULIC:FLUID
Posted on: 1982-07-02
Description
The brake hydraulic system bay be equipped with brake fluid containing an excess of water.
Consequence
Corrective Action
Dealer will replace defective brake fluid without charge to owner.
Notes
Vehicle description: passenger vehicles.system: service brakes; brake hydraulic system.consequences of defect: loss of braking ability could result in loss of vehiclecontrol and an accident.note: vehicle should not be driven until the purging procedure has beenperformed.