Recalls for your 1983 Grumman Kurbmaster

Recalls for 1983 Grumman Kurbmaster

RSS Feed


3 recalls found.
All Grumman Recalls
Kurbmasters

doug-mclachlan posted a photo:

Kurbmasters

DEFECT #1 - TRAILER HITCHES:FIFTH WHEEL ASSEMBLY


Posted on: 1986-01-10
Description
The reinforcing plates were omitted from the trailer pin box assembly, which is used to hold the fifth wheel assembly to the trailer.  Consequence of defect: a fatique failure off the pin box allow the fifth wheel assembly to separate from the trailer.  Therefore, the trailer will fall off the towing truck and roll uncontrolled on the roadway.  This may cause an accident.

Consequence


Corrective Action
Replace the pin box assembly if reinforcement plates are missing.

Notes
System:reinforcement plates, fifth wheel.  Vehicle description:fifth wheel trailers designed to be pulled behind a fordf series pickup truck.

DEFECT #2 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS


Posted on: 1985-12-02
Description
The routing of brake lines brought the line close to an area used to fasten the seat socket support structure to the chassis.  The fastening of seat support is done with bolts and when the bolts are tightened the free end of the bolts pinches one of the brake lines against the chassis frame rail.  This causes a reduction in the brake line which reduces the volume of fluid passing through the line.  Consequence of defect: the reduced volume of fluid affects the efficiency of the brake system.  Also the brake line may crack causing loss of fluid line.  In either case, a longer stopping distance would be required when maximum brake efficiency is needed.  Operation of a vehicle with damaged brakes could lead to a vehicle crash.

Consequence


Corrective Action
Inspect and replace the affected brake line with a new part.

Notes
System: brake line.  Vehicle description: kurbmaster body built on a ford ln 700 chassis.

DEFECT #3 - FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS


Posted on: 1987-03-30
Description
Clamp which secures the fuel filler hose to the body is missing.

Consequence
Hose could sag onto rear spring wearing a hole in thehose; this could allow fuel to spill onto ground while filling or drivingtruck.

Corrective Action
Install missing clamp and replace filler hose if it has been rubbed by spring.

Notes
System: fuel filler hose.vehicle description: truck bodies mounted on ford e 350 chassis.