2 recalls found. |
DEFECT #1 - STRUCTURE: FRAME AND MEMBERS:UNDERBODY SHIELDS
Posted on: 1984-10-09
Description
Vehicles are not in compliance with the impact test requirements of federal motor vehicle safety standard 301, fuel system integrity. The structure of the rear step bumper may not withstand a rear end collision similar to the force created in testing; fuel leakage may occur upon impact.
Consequence
Corrective Action
A fuel tank protective skid plate will be installed free of charge.
Notes
Vehicle description: multipurpose passenger vehicles equipped with step bumpersbut not equipped with fuel tank skid plates.system: fuel system; fuel tank.consequences of defect: leaking fuel could result in vehicle fire and personalinjury.
DEFECT #2 - SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS
Posted on: 1984-10-09
Description
The front brake hose, which is routed from the body brake tubing to the front axle connector, may have been twisted when installed. If the hose is twisted, it may become looped or coiled upon itself resulting in abrasive contact during normal operation.
Consequence
Corrective Action
The front brake hose on each vehicle involved will be inspected for proper routing and, if necessary, rerouted to prevent any abrasive contact.
Notes
Vehicle description: light trucks equipped with 4 wheel drive.system: service brakes; front brake hose.consequences of defect: this condition may eventually result in hose failure.reduced braking capability will result and may lead to an accident,particularly in situations where minimum stopping distance is required.