3 recalls found. |
DEFECT #1 - EXTERIOR LIGHTING:HEADLIGHTS:SWITCH
Posted on: 1988-01-25
Description
The headlamp switch is not identified as required by fmvss/101.
Consequence
Vehicles do not comply with fmvss 101.
Corrective Action
Provide a decal to be placed on instrument panel adjacent to the headlamp switch.
Notes
System: headlamp switch/fmvss 101.vehicle description: grumman kurbmaster bodies installed on ford e 350 chassis.
DEFECT #2 - SUSPENSION:MULTIPLE AXLE
Posted on: 1987-05-18
Description
Incorrect grade bolts were used in attaching the body to the chassis and in attaching the seat onto the chassis.
Consequence
Proper torque could not be achieved and body couldseparate from the chassis during an impact.
Corrective Action
Repair to eliminate incorrect bolt problem.
Notes
System: chassis bolts.vehicle description: trucks.
DEFECT #3 - FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Posted on: 1987-03-30
Description
Clamp which secures the fuel filler hose to the body is missing.
Consequence
Hose could sag onto rear spring wearing a hole in thehose; this could allow fuel to spill onto ground while filling or drivingtruck.
Corrective Action
Install missing clamp and replace filler hose if it has been rubbed by spring.
Notes
System: fuel filler hose.vehicle description: truck bodies mounted on ford e 350 chassis.