3 recalls found. |
DEFECT #1 - STEERING:LINKAGES
Posted on: 1989-04-05
Description
The retainer that secures the pitman arm to the steering gear output shaft may have insufficient torque and could work loose.
Consequence
This could cause the pitman arm to separate from thesteering gear and result in loss of steering control and an accident.
Corrective Action
Retorque pitman arm retainer.
Notes
System: steering.vehicle description: heavy-duty trucks equipped with sheppard power steeringgear.
DEFECT #2 - ENGINE AND ENGINE COOLING:ENGINE
Posted on: 1989-04-05
Description
A crack may reduce structural strength of the flywheel.
Consequence
Flywheel failure could cause personal injury tooccupants and/or loss of truck contrl and result in an accident.
Corrective Action
Remove and replace all suspect flywheels.
Notes
System: engine flywheel.vehicle description: heavy-duty trucks with dt/dta-360 and dt/dta-466 enginesand automatic transmissions.
DEFECT #3 - FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Posted on: 1989-08-25
Description
The screw that connects the rack to the governor linkage inside the bosch fuel injection pump may have insufficient torque on the retaining nut.
Consequence
Nut may work loose and screw fall out, allowing governorlinkage to separate from the rack, resulting in loss of control over enginespeed with potential for a vehicle crash.
Corrective Action
Retorque screw for fuel pump rack to governor linkage.
Notes
System:fuel injection pump.vehicle description: heavy duty trucks equipped with dt-360, dta-360 and dt-466engines and the robert bosch model a fuel injection pump.