Recalls for 1989 Volvo Fe Series

DEFECT #1 - STEERING:LINKAGES

Posted on: 1992-05-29
Description
Variances in the location of the tie rod arm bolt holes and steer axle spindle mounting holes result in the attaching bolts being incorrectly torqued.  This causes the tie rod attaching bolts to fail resulting in separation of the tie rod from the steering axle spindle.

Consequence
The tie rod separation results in a loss of steeringcontrol and possible vehicle accident.

Corrective Action
Replace the attaching bolts, tie rod arms and spindles as deemed appropriate after vehicle inspection.

Notes
System: suspension.vehicle description: class 7 and class 8 heavy trucks.

DEFECT #2 - EXTERIOR LIGHTING:TURN SIGNAL:SWITCH

Posted on: 1989-06-05
Description
Turn signal switch in left turn mode may not always make proper electrical contact.

Consequence
This provides no signal to traffic, and may cause anaccident.

Corrective Action
Inspect and replace suspect turn signal switches.

Notes
System: electrical/turn signal.vehicle description: trucks 26,000 lbs and greater gvwr.

DEFECT #3 - EQUIPMENT:OTHER:LABELS

Posted on: 1990-01-02
Description
Compliance label does not agree with weight capacity of new rear axle tires.

Consequence
Trucks do not comply with cfr part 567.

Corrective Action
Affix new compliance label with correct information in same location.

Notes
System: certification label / cfr part 567.vehicle description: heavy duty trucks with gvwr of 26,000 lbs or greater.