2 recalls found. |
DEFECT #1 - STRUCTURE:BODY:DOOR
Posted on: 1993-11-01
Description
Resin molded front handles fail at the door latch actuating rod attachment, freeing the rod to fall inside the door frame. Subsequent lowering of the associated window may force the actuating rod downward and release the door latch.
Consequence
Inadvertent actuation of the door latch causes the doorto open unexpectedly which could result in an occupant falling out of thevehicle.
Corrective Action
Dealers will replace the door handle/latch assembly.
Notes
System: structure; door assembly; handle; outer.vehicle description: passenger vehicles.
DEFECT #2 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM
Posted on: 1993-10-25
Description
The groove for the rear wheel bearing retainer ring was incorrectly machined.
Consequence
If the retaining ring does not sit correctly in thegroove, the axle lug nuts will break, causing the brake drum, wheel, and tireassembly to separate from the vehicle.
Corrective Action
Midas shops will replace the brake drums with other brake drums from another supplier.
Notes
System: brakes; hydraulic; shoe and drum systems; drum.equipment description: replacement brake drums for passenger vehicles, midaspart no. Bd 1552.notes: if your vehicle is presented to an authorized dealer on an agreed uponservice date and the remedy is not provided within a reasonable time and freeof charge or the remedy does not correct the defect or noncompliance, pleasecontact the national highway traffic safety administration'sauto safety at1-800-424-9393.empire motor company, ltd., of tokyo, japan manufactured these brake drums. Theu.s.a. Representative is emc of america, los angeles, ca.these brake drums were installed on vehicles from july 13, 1993 throughseptember 30, 1993.