Recalls for 1991 Volkswagen Cabrio

DEFECT #1 - SUSPENSION:FRONT:CONTROL ARM

Posted on: 1992-05-12
Description
The track control arms used to support the front wheels were improperly welded in the area of the flexible bushing mounting hole.  This causes a gradual opening of the mounting hole and loosening of the bushing.

Consequence
The enlarged opening of the mounting hole results infront wheel misalignment causing steering pull with the potential for anaccident.

Corrective Action
Dealers will inspect and replace the front suspension control arms where necessary.

Notes
System: suspension.vehicle description: passenger cars.

DEFECT #2 - VEHICLE SPEED CONTROL

Posted on: 1991-09-25
Description
The center of the water separator panel located in the engine compartment between engine and firewall could bend in the event someone leans on it during engine maintenance, repairs or checking of fluid levels.  A bent panel could interfere with the free movement of the accelerator linkage.

Consequence
Interference with the free movement of the acceleratorlinkage could result in unwanted acceleration which may cause an accident.

Corrective Action
Install reinforcement bracket to secure separator panel.

Notes
System: throttle linkage.vehicle description: passenger cars.

DEFECT #3 - FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

Posted on: 1992-04-24
Description
The fuel hose attached to the fuel distribution rail on the engine may shrink beyond the clamp force of the fuel hose clamps, allowing fuel to leak.

Consequence
Fuel leakage in the engine compartment can cause an underhood fire if the fuel comes in contact with a source of ignition.

Corrective Action
Replace the fuel hose attached to the fuel rail and install a new spring type self-tightening clamp.

Notes
System: fuel lines.vehicle description:passenger cars.