2 recalls found. |
DEFECT #1 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Posted on: 1997-06-06
Description
The left front brake lines were installed improperly at the assembly line resulting in insufficient clearance between the brake line and an upper control arm of the suspension.
Consequence
The line can be damaged during vehicle operation and can result in brake fluid leakage, reduced brake effectiveness, and increased stopping distances.
Corrective Action
Dealers will inspect the clearance between the brake line and the upper control arm. If the clearance is not according to specifications, the brake line will be replaced.
Notes
Owner notification began june 29, 1997.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact isuzu at 1-800-255-6727.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.
DEFECT #2 - SUSPENSION
Posted on: 1997-04-08
Description
These vehicles were manufactured without a lock washer and/or screws in the front hub.
Consequence
The bearing adjustment nut can loosen, resulting in too much free play between the wheel and axle. The bearing can seize, causing the wheel to lock affecting vehicle directional control increasing the risk of a crash.
Corrective Action
Dealers will inspect the front hubs to determine if the lock washer and screws were properly installed. If not, they will make the necessary repairs.
Notes
Owner notification:owner notification is expected to beginapril 10, 1997. Note:owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact isuzu of pr at 1-809-792-5858.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.