3 recalls found. |
DEFECT #1 - TRAILER HITCHES:FIFTH WHEEL ASSEMBLY
Posted on: 2001-08-01
Description
Vehicle description: single axle trailer converter dollies with tiltstop type counterbalance. Fatigue cracks in the tiltstop can occur.
Consequence
The tiltstop could break loose from the dolly frame while in operation.
Corrective Action
Dealers will add a brace to both sides of the dolly. Owner notification began august 16, 2001. Owners who do not receive the free remedy within a reasonable time should contact silver eagle at 1-800-547-6792.
Notes
Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
DEFECT #2 - SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT
Posted on: 2003-10-08
Description
On certain converter dollies equipped with bendix ec-30t electronic control units (ecu). If the trailer-mounted abs warning lamp circuit experiences an electrical short and the short is not repaired, the high side power switch inside the ecu that controls the illumination of the trailer-mounted abs warning lamp may eventually become thermally stressed and experience an electrical short.
Consequence
If the power switch shorts, it can result in an over-current condition in the ecu and lead to excessive heat, smoke, and possible fire.
Corrective Action
Bendix will provide a remedy kit and detailed instructions and also provide a labor allowance for the repair. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bendix at 1-800-478-1793 or silver eagle at 1-800-547-6792.
Notes
Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
DEFECT #3 - SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY
Posted on: 2013-08-23
Description
Silver eagle manufacturing company (silver eagle) is recalling certain model year 1999-2001 vast20w and 2001 csl20w trailer converter dollies. The affected dollies were incorrectly built to have a hole in the center of the axle beam pointing downward. The hole at the bottom causes a stress crack in the tension side of the beam resulting in axle failure.
Consequence
If the axle fails, the dolly could steer erratically, causing swerving, increasing the risk of a crash.
Corrective Action
Silver eagle will notify owners and instruct them to inspect their dollies for the position of the axle beam center hole. Anyone that has an affected dolly can get get a free replacement axle beam (installation is the owners responsibility) or $500 towards a replacement dolly for scrapping their old dolly. The recall began on september 20, 2013. Owners may contact silver eagle at 1-800-547-6792.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.