8 recalls found. |
DEFECT #1 - STRUCTURE:FRAME AND MEMBERS
Posted on: 2005-02-01
Description
On some motorcycles, certain frame welds do not meet manufacturing specifications. High loads created when riding on rough road surfaces or through potholes can cause the affected welds to crack.
Consequence
The welded area could break, resulting in rear suspension collapse or lower cross member separation, increasing the risk of a crash.
Corrective Action
Dealers will inspect and, if necessary, reinforce the welds on 2001-2002 motorcycles free of charge. On 2003-2004 motorcycles, the units will be repaired, no inspection will be necessary. The recall began on february 9, 2005. Owners may contact honda at 1-866-784-1870.
Notes
Honda recall no. P66.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #2 - SERVICE BRAKES, HYDRAULIC
Posted on: 2005-01-25
Description
Certain motorcycles equipped with combined-brake systems have a proportioning control valve (pcv) that mechanically proportions brake force when the rear brake is applied. A seal in some pcvs is improperly shaped, and brake fluid leakage may occur.
Consequence
If the motorcycle continues to be used after a leak occurs, the rear brake would eventually become inoperative. A loss of rear brake force could increase the risk of a crash.
Corrective Action
Dealers will inspect the rear brake forleakage. If leakage is confirmed, the dealer will replace the pcv free of charge. The recall began on january 31, 2005. Owners may contact honda at 866-784-1870.
Notes
Honda recall no.p65.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #3 - STRUCTURE: FRAME AND MEMBERS:UNDERBODY SHIELDS
Posted on: 2003-09-30
Description
On some motorcycles, certain frame welds do not meet manufacturing specifications. High loads created when riding on rough road surfaces or through potholes can cause the affected welds to crack.
Consequence
The welded area could break, resulting in rear suspension collapse or lower cross member separation, increasing the risk of a crash.
Corrective Action
Dealers will inspect and reinforce the welds on all frames. Owner notification began during october 2003. Owners should contact honda at 1-866-784-1870.
Notes
Customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
DEFECT #4 - FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Posted on: 2003-01-06
Description
On certain motorcycles, the bank angle sensors designed to shut off the fuel pump and the engine electrical power in the event the motorcycle falls over, were installed using the wrong size screws allowing the screws to eventually detach from their mounting point.
Consequence
If the sensor detaches, the engine will stop unexpectedly. Sudden loss of engine power, especially while turning, could cause a crash.
Corrective Action
Dealers will inspect the mounting screw size and, if necessary, install screws of the correct size. Owner notification began december 23, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact honda at 1-800-289-8226.
Notes
Customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
DEFECT #5 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Posted on: 2011-12-02
Description
Honda is recalling certain model year 2001-2010, and model year 2012 gl1800 goldwing motorcycles. Under certain conditions, there is a possibility that the combined braking system's secondary master cylinder may cause the rear brake to drag.
Consequence
Unexpected braking increases the risk of a crash, and riding the motorcycle with the rear brake dragging may generate enough heat to cause the rear brake to catch fire.
Corrective Action
Honda will notify owners, and dealers will inspect the secondary master cylinder and if necessary, replace it, free of charge. The safety recall began on january 6, 2012. Owners may contact honda customer service at 1-866-784-1870.
Notes
Honda's recall campaign number is s03.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
DEFECT #6 - EQUIPMENT
Posted on: 2011-12-16
Description
Kuryakyn is recalling certain aftermarket passenger floorboard mounts, part number 607005, sold and installed for use on 2001-2012 honda gl 1800 (goldwing) motorcycles. This mount was sold on kuryakyn 'transformer' passenger floorboard sets, part number 7005 from september 15, 2008, to present. The floorboard mount may crack and break free from the mounting bolts that secure the mount to the motorcycle.
Consequence
The passenger floorboard may separate from the vehicle, possibly resulting in injury or a crash.
Corrective Action
Kuryakyn will notify owners and provide replacement mount kits free of charge. The safety recall began on january 13, 2012. Owners may contact kuryakyn at 1-866-296-4728.
Notes
Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #7 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Posted on: 2015-10-23
Description
American honda motor co., inc. (honda) is recalling certain model year 2001-2010 and 2012-2015 gl1800, 2001-2005 gl1800a and 2013-2015 gl1800b motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released.
Consequence
A rear brake that drags may increase the risk of a vehicle crash. Additionally, extended riding with the rear brake dragging could generate enough heat to result in a fire.
Corrective Action
Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on december 7, 2015. Owners may contact honda customer service at 1-866-784-1870. Honda's number for this recall is jv6. Note: this recall supercedes recall 14v-472.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #8 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Posted on: 2015-10-23
Description
American honda motor co., inc. (honda) is recalling certain model year 2001-2010 and 2012-2015 gl1800, 2001-2005 gl1800a and 2013-2015 gl1800b motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released.
Consequence
A rear brake that drags may increase the risk of a vehicle crash. Additionally, extended riding with the rear brake dragging could generate enough heat to result in a fire.
Corrective Action
Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on december 7, 2015. Owners may contact honda customer service at 1-866-784-1870. Honda's number for this recall is jv6. Note: this recall supercedes recall 14v-472.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.