11 recalls found. |
DEFECT #1 - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE
Posted on: 2007-08-16
Description
On certain trucks equipped with parker single check valves (scv) provided by bendix. The defect exists in the parker scv that connects with the supply port of the sr-7 spring brake modulating valve. After prolonged use of the parker scv, the valve body retainer may become excessively worn and eventually break apart. Pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve.
Consequence
This condition can cause a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button. These conditions can occur without warning, leading to unintended vehicle rollaway, brake drag, or in the case of loss of primary circuit, inability to modulate the spring brakes.
Corrective Action
Mack is working with bendix to replace the parker single check valve. The recall began on january 9, 2008. Owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.
Notes
Mack recall no. Sc0334 (sc0327).customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
DEFECT #2 - STEERING
Posted on: 2005-04-28
Description
On certain heavy duty class 8 vehicles built with sheppard model m100 steering gear, the steering gear mounting pads, which attach the steering gear to the frame rail, may fail.
Consequence
The steering gear could loosen leading to a sudden loss of steering, which could result in a crash.
Corrective Action
Dealers will replace the steering gears. The recall began on may 6, 2005. Owners may contact mack at 1-610-709-2131.
Notes
Mack recall no. Sco298. Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #3 - FUEL SYSTEM, DIESEL
Posted on: 2006-10-13
Description
On certain trucks, a leak in the aset ac fuel injection line may spray fuel on the exhaust gas recirculation pipes that carry hot exhaust gases.
Consequence
This could potentially result in an engine fire.
Corrective Action
Mack has issued a stop work on this campaign under further notice (2-22-2007). The remedy does not adequately address the issue on all vehicles. Mack will re-release the recall in the near future. (please see nhtsa no. 07v159/mack recall no. Sco323 for vehicles that have had this repair already performed.) this recall has been superseded (please see 07v401/sc0324).
Notes
Mack trucks recall no. Sc0317.customers can also contact the national highway traffic safety administration?s vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #4 - POWER TRAIN:AXLE ASSEMBLY
Posted on: 2005-03-24
Description
On certain trucks equipped with the fxl axle and meritor 16.5 x 5 brakes with dust shields, there may be interference between the dust shield mounting bolt and the knuckle on the front axle. As a result of the interference, the bolt joint between the wheel end and the knuckle may not meet the torque requirements.
Consequence
This could result in vibration or brake performance issues. Braking capability would be diminished, increasing the risk of a crash.
Corrective Action
Dealers will remove the hub and brake assembly to install a new dust shield free of charge. The recall began on august 17, 2005. Owners may contact mack trucks 610-709-2131.
Notes
Mack truck recall no. Sc0293.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #5 - SERVICE BRAKES, AIR
Posted on: 2005-09-29
Description
On certain vehicles, the brake cam tubes on the steer axle may not have been greased.
Consequence
The brake cam journal may corrode which could lead to the brakes dragging. This could result in a vehicle fire.
Corrective Action
Dealers will remove the brake camshaft to inspect for corrosion. The brake camshaft will be replaced as required free of charge. The recall began on february 27, 2006. Owners may contact mack at 1-336-393-2233.
Notes
Mack recall no. Sc0304.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #6 - SERVICE BRAKES, AIR
Posted on: 2005-09-29
Description
On certain vehicles. The brake cam tubes on the drive axle may not have been greased.
Consequence
The brake cam journal may corrode which could lead to the brakes dragging. This could result in a vehicle fire.
Corrective Action
Dealers will remove the brake camshaft to inspect for corrosion. The brake camshaft will be replaced as required free of charge. The recall began on january 18, 2006. Owners may contact mack at 1-336-393-2233.
Notes
Mack recall no. Sc0305.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #7 - FUEL SYSTEM, DIESEL
Posted on: 2006-08-03
Description
On certain trucks, the fuel line crossover bracket may prematurely fail and unexpectedly fall to the road. The location and size of the bracket draws a concern to the bracket being picked up and thrown by the drive axle wheels.
Consequence
If the crossover bracket falls a crash may occur without prior notice.
Corrective Action
Dealers will replace the brackets free of charge. The recall began on august 20, 2006. Owners may contact mack trucks at 1-800-528-6586.
Notes
Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #8 - SERVICE BRAKES, AIR
Posted on: 2005-09-29
Description
On certain vehicles, the brake cam tubes on the steer and drive axles may not have been greased.
Consequence
The brake cam journal may corrode which could lead to the brakes dragging. This could result in a vehicle fire.
Corrective Action
Dealers will remove the brake camshaft to inspect for corrosion. The brake camshaft will be replaced as required free of charge. The recall began on february 27, 2006. Owners may contact mack at 1-336-393-2233.
Notes
Mack recall no. Sc0306.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #9 - FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Posted on: 2005-01-26
Description
On certain heavy duty class 8 diesel trucks equipped with aset ac engines, the location of the fuel inlet hose may result in overheating or abrasion of the hose, which may lead to a premature failure.
Consequence
If the hose fails, fuel can be sprayed on the exhaust manifold, which could potentially lead to an engine compartment fire.
Corrective Action
Dealers will repair and replace the fuel inlet hose free of charge. The recall began on february 14, 2005. Due to some quality and supply issues with parts to support this safety recall, owners may have been informed during april 2005,that the safety recall was on hold. These issues have now been resolved. For owners who have not had their vehicle(s) repaired, contact a mack parts and service center immediately to schedule an appointment to have your vehicle(s) repaired. Owners may contact mack trucks at 610-709-2131.
Notes
Mack trucks recall no. Sc0292.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #10 - FUEL SYSTEM, DIESEL
Posted on: 2007-09-05
Description
On certain trucks equipped with aset ac model engines, the engine as configured with an external exhaust gas recirculation system makes servicing the fuel injection lines difficult when using traditional tools. Therefore, it is possible for fuel leaks to develop when removing and installing the fuel injection lines.
Consequence
A leak in the fuel injection line may spray fuel on the hot surfaces of the exhaust gas recirculation system, which could result in an engine fire.
Corrective Action
Dealers will replace the fuel injection lines free of charge. Note: this recall supersedes a previous campaign conducted in 2006 (please see 06v392). The recall began on september 11, 2007, with subsequent mailings every six weeks until april 2008. Owners may contact mack at 800-528-6586.
Notes
Mack recall no. Sc0324.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #11 - EXTERIOR LIGHTING:HEADLIGHTS:SWITCH
Posted on: 2008-12-24
Description
Mack is recalling 34,269 my 1999-2005 cx and my 2004-2008 cxn trucks. The headlight switch may prematurely fail resulting in inoperative or intermittent headlights.
Consequence
The head lights may not operate properly which could result in intermittent or no headlight function. This could impair a driver's visibility, increasing the risk of a crash.
Corrective Action
Dealers will replace the headlight switch. The recall began on february 27, 2009. Owners may contact mack at 1-800-528-6586.
Notes
Mack recall no. Sc0342.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .