7 recalls found. |
DEFECT #1 - ENGINE AND ENGINE COOLING
Posted on: 2007-06-25
Description
On certain transit buses built with cummins ism c876 engines, the electronic control module fails to recognize inputs of the vehicle electronic control unit or from a driver actuated dash switch thereby increasing the risk of unintended (or unexpected) elevated exhaust temperatures.
Consequence
While this condition does not involve a risk of fire in the vehicle itself, it could present a fire hazard in a situation where the vehicle's exhaust is in close proximity to materials or substances that can melt, burn, or explode.
Corrective Action
Cummins, in conjunction with gillig, will conduct the remedy campaign. The recall began on july 31, 2007. Owners can contact cummins at 1-800-343-7357 or gillig at 1-510-785-1500.
Notes
Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #2 - STEERING:HYDRAULIC POWER ASSIST:HOSE, PIPING, AND CONNECTIONS
Posted on: 2007-06-25
Description
On certain transit buses, the hydraulic hose located in the engine compartment was manufactured incorrectly which could cause a hydraulic fluid leak.
Consequence
Hydraulic fluid leakage could lead to a loss of fluid which could affect vehicle steering or create the conditions for a potential engine compartment fire.
Corrective Action
Gillig will provide correct hoses to their customers for replacement or will replace the hoses for them. The recall began on june 27, 2007. Owners may contact gillig at 1-510-785-1500.
Notes
Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #3 - INTERIOR LIGHTING
Posted on: 2009-09-28
Description
Gillig corporation is recalling certain model year 2001 through 2009 transit buses manufactured between january 2001 and september 2009 equipped with luminator horizon led side destination signs. The connector board can corrode due to an accumulation of moisture under the connector.
Consequence
A short could occur, possibly causing smoke and fire.
Corrective Action
Gillig will notify owners and luminator will repair the buses free of charge. The safety recall began on spetember 29, 2009. Owners may contact luminator at 1-972-516-3033 or gillig field services at 1-800-735-1500.
Notes
Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
DEFECT #4 - SERVICE BRAKES, AIR
Posted on: 2008-01-09
Description
On certain transit buses equipped with graham-white air dryers, the air dryer timer modules may allow sufficient quantities of moisture to enter and affect the operation of the vehicle air brake system.
Consequence
Failure of the air brake system due to moisture could result in a crash.
Corrective Action
Gillig, in conjunction with graham-white, will replace the air dryer timer module on the affected vehicles. The recall began on january 29, 2008. Owners may contact gillig at 1-510-785-1500 or graham-white at 540-387-5620.
Notes
Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #5 - SUSPENSION
Posted on: 2008-04-16
Description
Gillig is recalling 31 my 2007 29 foot low floor transit buses equipped with saf- holland adl series rear suspensions. In some instances the transverse beam was not properly welded which could result in a failure of the weld.
Consequence
If the weld fails, vehicle stability while cornering could be affected resulting in loss of vehicle control, possibly resulting in a crash. In addition, the transverse beam could drop to the ground causing sparks that could cause a fire hazard.
Corrective Action
Gillig is working with saf holland to have a visual inspection of the adl transverse beam performed. If a weld defect is identified, saf holland will provide a service replacement kit that contains a new transverse beam, all necessary installation hardware, beam replacement and instructions free of charge (please see 08e031). The recall began on april 29, 2008. Owners may contact gillig at 1-510-264-5031 or saf-holland at 1-231-773-3271.
Notes
Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.
DEFECT #6 - ENGINE AND ENGINE COOLING:ENGINE
Posted on: 2014-06-24
Description
Gillig, llc (gillig) is recalling certain model year 2007-2014 lowfloor transit buses manufactured september 26, 2007, through january 24, 2014. In the affected vehicles, the engine oil sampling hose may leak oil due to being routed too closely to hot engine exhaust components.
Consequence
If the sampling hose leaks oil in the presence of hot engine engine exhaust components, there is an increased risk of fire.
Corrective Action
Gillig will notify owners, and dealers will inspect the oil sampling hose. If the hose is routed too closely, the hose will be removed, replaced and rerouted to provide appropriate clearance of the hot components. The recall is expected to begin in early august 2014. Owners may contact gillig customer service at 1-800-735-1500.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #7 - EXTERIOR LIGHTING:TURN SIGNAL
Posted on: 2017-02-28
Description
Gillig llc (gillig) is recalling certain model year 1997-2017 low floor transit buses. The front turn signals installed on standard profile (non-brt) buses may not be sufficiently visible to other drivers or pedestrians. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard number 108, lamps, reflective devices, and associated equipment.
Consequence
The reduced visibility of the turn signals may increase the risk of a crash.
Corrective Action
Gillig will notify owners, and dealers will install turn signals that have increased visibility. The recall began june 7, 2019. Owners may contact gillig customer service at 1-510-264-5073 or 1-800-735-1500.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.