4 recalls found. |
DEFECT #1 - ENGINE AND ENGINE COOLING
Posted on: 2011-03-31
Description
Paccar is recalling certain model year 2007-2011 kenworth c500, t2000, t600, and t660, as well as model year 2009-2011 peterbilt 387 and 388 trucks equipped with caterpillar c15 engine and manufactured from may 11, 2006, through september 17, 2010. Degradation of a combustion tube weld can cause radial heat impingement on the body which may burn through certain bodies used on c15 engines.
Consequence
This could result in a fire.
Corrective Action
Caterpillar is handling the owner notification and remedy for this campaign. Please see caterpillar's defect report 11e-006. Caterpillar will replace the single piece combustion tube with a thick wall combustion tube which will not allow the heat to break through. This service will be performed free of charge. Due to a parts supply issue, owners will be notified by the end of april 2011 about the safety defect, and will then be notified again once the free remedy is available, currently estimated to be around late july 2011. Owners may contact caterpillar toll-free at 1-800-447-4986.
Notes
Kenworth safety recall no. 11kwb & peterbilt safety recall no. 0311-a.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
DEFECT #2 - STEERING:COLUMN
Posted on: 2010-07-02
Description
Paccar is recalling certain model year 2008-2010 trucks equipped with trw steering shafts. The circumferential weld around the steering shaft tube that welds the splined tube to the non-splined tube may be mislocated. Mislocation of the circumferential weld may allow the splined tube and non-splined tube to rotate relative to one another during a low speed, high torque turn, possibly resulting in a separation of the two tubes.
Consequence
A separation of the splined and non-splined tubes would cause a loss of steering control and increase the risk of a vehicle crash.
Corrective Action
Dealers will inspect the steering shaft using a weld placement gauge provided by trw. Any steering shaft found to have been welded improperly will be replaced free of charge. The safety recall began on july 30, 2010. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.
Notes
Kenworth's recall campaign number is 10kw-f & peterbilt recall no. 0610-d. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
DEFECT #3 - SERVICE BRAKES, AIR:DRUM:CHAMBER
Posted on: 2010-05-19
Description
Kenworth is recalling certain model year 2009 through 2011 c500 trucks manufactured from october 24, 2008 through january 13, 2010. During maneuvers with certain combinations of wheel turn, articulation, and bump, the brake chamber can contact the rear hood support.
Consequence
The contact can damage the brake chamber leading to a loss of braking function at the affected wheel end, increasing the risk of a crash.
Corrective Action
Kenworth will notify owners and dealers will repair the vehicles free of charge. The safety recall began on june 8, 2010. Owners may contact kenworth at 1-425-828-5440.
Notes
Kenworth's recall number is 10kwc.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
DEFECT #4 - STRUCTURE:BODY:HOOD
Posted on: 2010-05-19
Description
Kenworth is recalling certain model year 2009 through 2011 c500 trucks manufactured from october 24, 2008 through january 13, 2010. During maneuvers with certain combinations of wheel turn, articulation, and bump, the brake chamber can contact the rear hood support.
Consequence
The contact can damage the brake chamber leading to a loss of braking function at the affected wheel end, increasing the risk of a crash.
Corrective Action
Kenworth will notify owners and dealers will repair the vehicles free of charge. The safety recall began on june 8, 2010. Owners may contact kenworth at 1-425-828-5440.
Notes
Kenworth's recall number is 10kwc.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .