3 recalls found. |
DEFECT #1 - ENGINE AND ENGINE COOLING
Posted on: 2011-09-15
Description
Daimler trucks is recalling certain model year 2011- 2012 business class m2 and coronado trucks manufactured from september 1, 2010, through december 31, 2010, equipped with a cummins isx or isl diesel engine. The v-band clamp assembly, part numbers q187684, q187685, and q187686, used to connect the inlet and outlet cone sections to the diesel oxidation catalyst (doc)/diesel particulate filter (dpf) include a t-bolt which can fracture and fail when subjected to stress or load. A fracture or failure of the t-bolt may cause the clamp to loosen and the inlet or outlet sections attached to the doc/dpf housing to disconnect.
Consequence
If the inlet or outlet sections disconnect, hot exhaust gases can vent prior to exiting the tailpipe, creating the risk of combustion and a fire. If both clamps fail, there is a risk in some applications that the doc/dpf housing may detach completely, creating a road hazard.
Corrective Action
Daimler trucks is working with cummins to identify and notify owners of the recall campaign. Repairs will be performed by authorized cummins dealers free of charge. The safety recall began on october 10, 2011. Owners may contact cummins at 1-812-377-5000 or daimler trucks at 1-800-547-0712.
Notes
Cummins' recall campaign number is c1154.daimler trucks' safety recall number is fl-611.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .
DEFECT #2 - SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
Posted on: 2019-05-15
Description
Daimler trucks north america llc (dtna) is recalling certain 2012-2019 freightliner custom chassis mt55 and mt45 vehicles. The brake pedal clevis pin clip may rub or bend on the throttle pedal and possibly detach.
Consequence
If the clip is detaches and clevis pin slides out of position, the brake lights may fail. Loss of brake lights may mislead other drivers if they are unaware the vehicle is stopping or slowing down, which increases the risk of crash. If the pin continues to slide out further, the pedal may detach, increasing the risk of crash.
Corrective Action
Dtna will notify the vehicle manufacturers that purchased these chassis, and dtna dealers will inspect the clevis pin clearance and correct it as necessary, free of charge. Dtna issued owners an interim notification on july 12, 2019. The recall began august 28, 2019. Owners may contact dtna customer service at 1-800-547-0712. Dtna's number for this recall is fl-814.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #3 - EXTERIOR LIGHTING:BRAKE LIGHTS
Posted on: 2019-05-15
Description
Daimler trucks north america llc (dtna) is recalling certain 2012-2019 freightliner custom chassis mt55 and mt45 vehicles. The brake pedal clevis pin clip may rub or bend on the throttle pedal and possibly detach.
Consequence
If the clip is detaches and clevis pin slides out of position, the brake lights may fail. Loss of brake lights may mislead other drivers if they are unaware the vehicle is stopping or slowing down, which increases the risk of crash. If the pin continues to slide out further, the pedal may detach, increasing the risk of crash.
Corrective Action
Dtna will notify the vehicle manufacturers that purchased these chassis, and dtna dealers will inspect the clevis pin clearance and correct it as necessary, free of charge. Dtna issued owners an interim notification on july 12, 2019. The recall began august 28, 2019. Owners may contact dtna customer service at 1-800-547-0712. Dtna's number for this recall is fl-814.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.