24 recalls found. |
DEFECT #1 - ELECTRICAL SYSTEM:BATTERY
Posted on: 2014-08-15
Description
Altec industries, inc. (altec) is recalling certain model year 2000-2013 aerial device and digger derrick trucks, equipped with sure power battery equalizers containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.
Consequence
Once electrically conductive, the material is capable of melting and burning, increasing the risk of a fire.
Corrective Action
Altec will notify owners, and dealers will replace any affected battery equalizer, free of charge. The recall is expected to begin in september 2014. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 603.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #2 - EQUIPMENT
Posted on: 2015-02-19
Description
Altec industries, inc. (altec) is recalling certain model year 2011-2014 aerial devices, models l36a, lrv, and lr7, manufactured june 1, 2011, to september 30, 2014, and built with texas hydraulics upper boom drive cylinders. In the affected aerial devices, the cylinder base end lug casting may develop cracks.
Consequence
If the cylinder lug castings crack, they may fail, resulting in unintended movement of the boom, increasing the risk of personal injury or death to the aerial device user or those nearby.
Corrective Action
Altec will notify owners, and dealers will inspect the cylinders for specific casting suspect lots. If both upper boom drive cylinders are not of the suspect lots, no further action is required. If a cylinder is found to be of one of the suspect lots, it will be inspected for visible cracks. If cracks are found the unit should be removed from service immediately and the cylinder will be replaced. If no cracks are found, the unit will be scheduled for magnetic particle inspection of the cylinder lug within 60 days. All of these actions will be performed free of charge. The recall began on april 6, 2015. Owners may contact altec customer service at 1-800-860-0183. Altec's number for this recall is csn 611.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #3 - EQUIPMENT
Posted on: 2015-07-28
Description
Altec industries inc. (altec) is recalling certain model year 2006-2015 aerial devices manufactured from june 1, 2006, through april 1, 2015. The affected aerial devices outrigger interlock control system may not detect proper deployment of the outriggers, allowing for instability of the boom.
Consequence
If the aerial device is operated while the outrigger is not properly deployed it can cause instability of the boom, increasing the risk of person injury or death.
Corrective Action
Altec will notify owners, and dealers will replace the aerial device with a new outrigger interlock module, free of charge. The recall began on september 4, 2015. Owners may contact altec customer service at 1-205-991-7733. Altec's number for this recall is csn 625.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #4 - EQUIPMENT
Posted on: 2014-11-21
Description
Altec industries inc. (altec) is recalling certain model year 1999-2014 aerial devices models a65, a70, a75, a72-, a/77-t, a82-t, a72-te88, and a77-te93 manufactured january 1, 1999, to july 15, 2014. The affected aerial devices may have an improperly set hydraulic pressure transducer which relieves excessive backpressure in the hydraulic tank circuit.
Consequence
In cooler temperatures, the improperly set hydraulic pressure transducer may result in inadvertent boom movement, increasing the risk of injury to the occupant or those nearby.
Corrective Action
Altec will notify owners, and dealers will replace and install a pressure switch, free of charge. The recall began in january 16, 2015. Owners may contact altec customer service at 1-205-991-7733. Altec's number for this recall is csn 609.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #5 - ELECTRICAL SYSTEM
Posted on: 2015-02-23
Description
Altec industries inc. (altec) is recalling certain model year 2012-2014 digger derrick and aerial device vehicles manufactured october 1, 2012, to june 30, 2014, and mounted on freightliner chassis. In the event of a short circuit condition, the 30 amp breaker to the trailer relay module may react too slowly to prevent the module from overheating.
Consequence
If the module overheats, there is an increased risk of a fire.
Corrective Action
Altec will notify owners, and dealers will replace the 30 amp circuit breaker with a 20 amp one, free of charge. The recall began on april 17, 2015. Owners may contact altec customer service at 1-800-860-0183. Altec's number for this recall is csn 612.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #6 - EQUIPMENT
Posted on: 2018-02-16
Description
Altec industries inc. (altec) is recalling certain 1997-2017 lrv, and lr7 aerial devices. The platform leveling yoke may fail, possibly causing an occupant to fall from the platform.
Consequence
Failure of the platform leveling yoke can cause the occupant of the platform to fall out, increasing their risk of injury.
Corrective Action
Altec will notify owners, and will inspect the leveling system to verify the correct alignment, replacing any improperly aligned yokes, free of charge. The recall began on april 11, 2018. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 672.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #7 - EQUIPMENT
Posted on: 2017-09-13
Description
Altec industries inc. (altec) is recalling certain 2011-2017 altec ls63 aerial devices. The jib mast on these vehicles may bend under load.
Consequence
The jib mast may bend and fail, increasing the risk of injury to those nearby.
Corrective Action
Altec will notify owners and test the jib mast, replacing any that fail, free of charge. The recall began on october 13, 2017. Owners may contact altec customer service at 1-205-991-7733. Altec's number for this recall is csn 664.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #8 - EQUIPMENT
Posted on: 2017-09-13
Description
Altec industries inc. (altec) is recalling certain 2011-2017 altec ls63 aerial devices. The jib mast on these vehicles may bend under load.
Consequence
The jib mast may bend and fail, increasing the risk of injury to those nearby.
Corrective Action
Altec will notify owners and test the jib mast, replacing any that fail, free of charge. The recall began on october 13, 2017. Owners may contact altec customer service at 1-205-991-7733. Altec's number for this recall is csn 664.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #9 - TRAILER HITCHES
Posted on: 2018-05-31
Description
Altec industries inc. (altec) is recalling certain 2012-2018 altec ls63 and ls87 aerial devices equipped with a pintle hook mounted into the class 3 receiver tube. This towing combination was shipped without a placard that provides the maximum allowable towing limit, possibly resulting in the receiver tube being overloaded.
Consequence
An overloaded receiver tube could detach, increasing the risk of a crash.
Corrective Action
Altec will notify owners, and provide them with a placard that states the limit of the receiver tube assembly as 600lbs vertical load, and 6,000lbs towing capacity, free of charge. The recall began on july 25, 2018. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 684.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #10 - STRUCTURE
Posted on: 2018-08-27
Description
Altec industries inc. (altec) is recalling certain 2008-2018 aerial devices equipped with aluminum work platforms. The platform mounting holes may fail, causing the platform to move unexpectedly.
Consequence
If the platform moves unexpectedly, it can increase the risk of injury.
Corrective Action
Altec will notify owners, and dealers will install a bracket reinforcing kit, free of charge. The recall is expected to begin october 17, 2018. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 689.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #11 - EQUIPMENT
Posted on: 2017-09-13
Description
Altec industries inc. (altec) is recalling certain 2011-2017 altec ls63 aerial devices. The jib mast on these vehicles may bend under load.
Consequence
The jib mast may bend and fail, increasing the risk of injury to those nearby.
Corrective Action
Altec will notify owners and test the jib mast, replacing any that fail, free of charge. The recall began on october 13, 2017. Owners may contact altec customer service at 1-205-991-7733. Altec's number for this recall is csn 664.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #12 - TRAILER HITCHES
Posted on: 2018-05-31
Description
Altec industries inc. (altec) is recalling certain 2012-2018 altec ls63 and ls87 aerial devices equipped with a pintle hook mounted into the class 3 receiver tube. This towing combination was shipped without a placard that provides the maximum allowable towing limit, possibly resulting in the receiver tube being overloaded.
Consequence
An overloaded receiver tube could detach, increasing the risk of a crash.
Corrective Action
Altec will notify owners, and provide them with a placard that states the limit of the receiver tube assembly as 600lbs vertical load, and 6,000lbs towing capacity, free of charge. The recall began on july 25, 2018. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 684.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #13 - SERVICE BRAKES, AIR
Posted on: 2019-06-24
Description
Altec industries inc. (altec) is recalling certain 2003-2019 altec ta45, ta50, ta55, ta60, l37, l39, lrv, lr7, a-t40c, t40p and ap45 vehicles equipped with air-cushioned pintle hitch and/or accessory air components. The accessories utilizing chassis air supply may be missing pressure protection valves. The accessory lines may not prevent service brake line pressure loss due to failure or leakage in the accessory air system. Additionally, the air cushioned pintle hook may have been connected to the incorrect air lines. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 121, air brake systems.
Consequence
Loss of service brake pressure can increase the risk of a crash.
Corrective Action
Altec will notify owners, and dealers will inspect the pressure protection installation and repair any unit that does not pass inspection, free of charge. The recall began august 15, 2019. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 724.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #14 - EQUIPMENT:MECHANICAL:WINCH
Posted on: 2019-08-15
Description
Altec industries inc. (altec) is recalling certain 2012-2019 altec am60e, aa55e, ah75/85/100, ah125, and ah150 aerial devices. The recovery winch valve may allow the winch to lift more than it is rated for.
Consequence
If the recovery winch attempts to lift more than it is rated for, it can increase the risk of an injury or death.
Corrective Action
Altec will notify owners, and instruct owners to inspect the winch pressures and install an external pressure relief valve, if necessary, free of charge. The recall began october 7, 2019. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 734.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #15 - EQUIPMENT
Posted on: 2021-06-02
Description
Altec industries, inc. (altec) is recalling certain 2005-2021 a65, a70, a75, a72-t, a77-t, and a82-t vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.
Consequence
Unintended movement of the lower and upper booms increases the risk of injury.
Corrective Action
Altec will install a jumper hose and check valve into the boomtip tank lines and replace the overcenter blocking cartridge with an internally referenced drain path, free of charge. Owner notification letters were mailed on july 28, 2021. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 823.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #16 - EQUIPMENT ADAPTIVE/MOBILITY
Posted on: 2021-06-02
Description
Altec industries, inc. (altec) is recalling certain 2005-2021 a65, a70, a75, a72-t, a77-t, and a82-t vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.
Consequence
Unintended movement of the lower and upper booms increases the risk of injury.
Corrective Action
Altec will install a jumper hose and check valve into the boomtip tank lines and replace the overcenter blocking cartridge with an internally referenced drain path, free of charge. Owner notification letters were mailed on july 28, 2021. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 823.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #17 - STRUCTURE:FRAME AND MEMBERS
Posted on: 2021-09-23
Description
Altec industries, inc. (altec) is recalling certain 2011-2016 at200a aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Consequence
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Corrective Action
Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed on october 13, 2021. Owners may contact altec's customer service at 1-877-462-5832. Altec's number for this recall is csn 836.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #18 - EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE
Posted on: 2021-09-23
Description
Altec industries, inc. (altec) is recalling certain 2011-2016 at200a aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Consequence
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Corrective Action
Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed on october 13, 2021. Owners may contact altec's customer service at 1-877-462-5832. Altec's number for this recall is csn 836.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #19 - STRUCTURE:FRAME AND MEMBERS
Posted on: 2021-11-16
Description
Altec industries, inc. (altec) is recalling certain 2012-2016 at200a aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Consequence
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Corrective Action
Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed january 13, 2022. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 840.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #20 - STRUCTURE:FRAME AND MEMBERS
Posted on: 2021-11-16
Description
Altec industries, inc. (altec) is recalling certain 2012-2016 at200a aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Consequence
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Corrective Action
Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed january 13, 2022. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 840.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #21 - STRUCTURE:FRAME AND MEMBERS
Posted on: 2021-11-16
Description
Altec industries, inc. (altec) is recalling certain 2012-2016 at200a aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Consequence
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Corrective Action
Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed january 13, 2022. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 840.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #22 - EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE
Posted on: 2021-11-16
Description
Altec industries, inc. (altec) is recalling certain 2012-2016 at200a aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Consequence
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Corrective Action
Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed january 13, 2022. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 840.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #23 - EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE
Posted on: 2021-11-16
Description
Altec industries, inc. (altec) is recalling certain 2012-2016 at200a aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Consequence
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Corrective Action
Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed january 13, 2022. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 840.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #24 - EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE
Posted on: 2021-11-16
Description
Altec industries, inc. (altec) is recalling certain 2012-2016 at200a aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Consequence
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Corrective Action
Altec will repair the side plates as necessary, or provide a repair kit, free of charge. Owner notification letters were mailed january 13, 2022. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 840.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.