5 recalls found. |
DEFECT #1 - ELECTRICAL SYSTEM:IGNITION:SWITCH
Posted on: 2013-05-28
Description
Paccar is recalling certain model year 2014 kenworth t170, t270, t370, t470, t660, t680, t800, t880, and w900 trucks manufactured may 6, 2013, through may 17, 2013; and model year 2014 peterbilt 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, 389k, 567, 579 and 587 trucks manufactured may 1, 2013 through may 17, 2013. An internal defect in the ignition switch causes the starter to engage when a key is partially inserted, before the key is turned.
Consequence
Unintended engine startup could cause injury to a person working in the engine compartment. Vehicles with standard transmissions may experience unexpected movement, which may result in personal injury or a crash.
Corrective Action
Paccar will notify owners, and dealers will replace affected ignition switches, free of charge. The recall began on june 14, 2013. Owners may contact kenworth at 1-425-828-5000 or peterbilt at 1-940-591-4000. Kenworth's recall campaign number is 13kwf. Peterbilt's recall campaign number is 0513-e.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #2 - SEAT BELTS
Posted on: 2014-01-24
Description
Paccar incorporated (paccar) is recalling certain model year 2014 kenworth t660, t680, t700,t800, t880, w900, t440, t470, t370, t270, t170, c500, and c550 chassis manufactured between august 7, 2013, and october 31, 2013, and peterbilt 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 chassis manufactured between august 7, 2013, and november 3, 2013, and equipped with immi-brand l9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of federal motor vehicle safety standard (fmvss) no. 209, seat belt assemblies.
Consequence
If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.
Corrective Action
Paccar will notify owners, and dealers will inspect and replace the seat belt buckles, as necessary, free of charge. The recall began on march 31, 2014. Owners may contact paccar at 1-425-468-7400. Kenworth's number for this campaign is 14kwc. Peterbilt's number for this campaign is 114-b.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #3 - POWER TRAIN:AXLE ASSEMBLY
Posted on: 2017-09-08
Description
Paccar incorporated (paccar) is recalling certain 2009-2010 peterbilt 210 and 220 trucks; 2012-2018 peterbilt 210, 220, 330 and 337 trucks; and 2010-2018 kenworth k270 and k370 trucks. These lfna trucks have a front axle sway bar link that may come loose on the frame rail end and fall into the path of the drag link, possibly binding the steering system.
Consequence
If the sway bar link detaches and falls into the drag link, it may impact the ability of the vehicle to steer properly, increasing the risk of a crash.
Corrective Action
Paccar will notify owners, and dealers will inspect the upper sway bar link attachment for a hardened washer installed between the bushing and the nut, installing a washer if it is missing, free of charge. The recall began on october 2730, 2017. Owners may contact kenworth customer service at 1-425-828-5000 or peterbilt customer service at 1-940-591-4220. Paccar's numbers for this recall are 817-d and 17kwe.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #4 - SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT
Posted on: 2020-04-07
Description
Paccar incorporated (paccar) is recalling certain 2008-2019 peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 kenworth t170, t270, t370, t660, t680, t800, t880, and w900 vehicles equipped with namux software. In the event that the anti-lock brake system (abs) loses battery and/or ignition power to the controller, the dash warning light for the abs may not illuminate to warn the driver of the loss of abs. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 121, air brake systems, and 136, electronic stability control system on heavy vehicles.
Consequence
If the driver unknowingly operates the vehicle without the abs functioning, there would be an increased risk of a crash.
Corrective Action
Paccar will notify owners, and dealers will update the namux software within the cab control module, free of charge. Paccar issued owners an interim notification on june 4, 2020. The recall began may 26, 2020. Owners may contact kenworth customer service at 1-425-828-5888 or peterbilt customer service at 1-940-591-4220. Paccar's number for this recall is 20pbc and 20kwb.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #5 - ELECTRONIC STABILITY CONTROL
Posted on: 2020-04-07
Description
Paccar incorporated (paccar) is recalling certain 2008-2019 peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 kenworth t170, t270, t370, t660, t680, t800, t880, and w900 vehicles equipped with namux software. In the event that the anti-lock brake system (abs) loses battery and/or ignition power to the controller, the dash warning light for the abs may not illuminate to warn the driver of the loss of abs. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 121, air brake systems, and 136, electronic stability control system on heavy vehicles.
Consequence
If the driver unknowingly operates the vehicle without the abs functioning, there would be an increased risk of a crash.
Corrective Action
Paccar will notify owners, and dealers will update the namux software within the cab control module, free of charge. Paccar issued owners an interim notification on june 4, 2020. The recall began may 26, 2020. Owners may contact kenworth customer service at 1-425-828-5888 or peterbilt customer service at 1-940-591-4220. Paccar's number for this recall is 20pbc and 20kwb.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.