6 recalls found. |
DEFECT #1 - EQUIPMENT
Posted on: 2016-05-16
Description
Altec industries inc. (altec) is recalling certain model year 2014-2016 dl and dm digger derricks manufactured october 1, 2014, to april 30, 2016 with the digger booms mounted in the corner. The rotation bearing fasteners on the affected vehicles may not have been properly torqued.
Consequence
If the fasteners are loose or improperly torqued, structural failure may result, causing unexpected movement of the digger derrick and increasing the risk of injury.
Corrective Action
Altec has notified owners, and instruct them to perform the annual torque inspection, free of charge. The recall began june 2, 2016. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 633.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #2 - EQUIPMENT:MECHANICAL:WINCH
Posted on: 2016-07-14
Description
Altec industries inc. (altec) is recalling certain model year 2015-2016 aerial devices and digger derrick vehicles equipped with front bumper winches or capstans, manufactured december 26, 2015, to march 30, 2016. The affected vehicles have a hydraulic motor whose shaft may fail resulting in unexpected movement of the winch or the capstan.
Consequence
Unexpected winch movement may increase the risk of injury.
Corrective Action
Altec will notify owners, and dealers will replace the hydraulic motor, free of charge. The recall began on august 26, 2016, 2016. Owners may contact altec customer service at 1-205-991-7733. Altec's number for this recall is csn 635.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #3 - ELECTRICAL SYSTEM:SOFTWARE
Posted on: 2018-10-25
Description
Altec industries (altec) is recalling certain 2014-2018 dhh and dhb digger derrick vehicles. The zone rating system may not alert the operator that the load being handled exceeds the rated load for the unit's specific position.
Consequence
Without an alert, there is a greater risk of unit instability or a loss of load control, increasing the risk of injury.
Corrective Action
Altec will notify owners and dealers will update the zone rating system software, free of charge. The recall began december 12, 2018. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 700.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #4 - EQUIPMENT:OTHER:LABELS
Posted on: 2019-05-14
Description
Altec industries inc. (altec) is recalling certain 2009-2019 dl/dm, dl/dmb, dh, d/2/3/4, and dc digger derrick vehicles. The slope indicator placard card may falsely indicate that the unit could be used without leveling on a 5 degree slope.
Consequence
An operator may improperly set up the unit, making the unit unstable, thus increasing the risk of injury.
Corrective Action
Altec will notify owners, and issue csn 719 to owners, instructing them to remove the incorrect placards, free of charge. The recall began july 2, 2019. Owners may contact altec customer service at 1-877-462-5832. Altec's number for this recall is csn 719.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #5 - EQUIPMENT:MECHANICAL:WINCH
Posted on: 2023-09-15
Description
Altec industries, inc. (altec) is recalling certain 2004-2023 dl42 and dl45 digger derricks. The incorrect hydraulic load holding valve may have been installed, which can cause the winch to lower uncontrollably and the load to fall.
Consequence
An uncontrolled load falling increases the risk of injury to personnel or others nearby.
Corrective Action
Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed october 6, 2023. Owners may contact altec's customer service at 1-877-462-5832. Altec's number for this recall is mab 3113.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.
DEFECT #6 - EQUIPMENT:MECHANICAL:WINCH
Posted on: 2023-09-15
Description
Altec industries, inc. (altec) is recalling certain 2004-2023 dl42 and dl45 digger derricks. The incorrect hydraulic load holding valve may have been installed, which can cause the winch to lower uncontrollably and the load to fall.
Consequence
An uncontrolled load falling increases the risk of injury to personnel or others nearby.
Corrective Action
Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed october 6, 2023. Owners may contact altec's customer service at 1-877-462-5832. Altec's number for this recall is mab 3113.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.