3 recalls found. |
DEFECT #1 - ENGINE AND ENGINE COOLING:ENGINE
Posted on: 2018-07-17
Description
Bmw of north america, llc (bmw) is recalling certain 2018 bmw 540d xdrive vehicles. The crankshaft sensor may be equipped with incorrect firmware, preventing the sensor from properly processing input from the crankshaft reluctor ring, possibly resulting in a vehicle stall. On september 12, 2018, bmw expanded the recall to a total of 5,309 vehicles including certain 2018-2019 bmw 540d xdrive, 230i m240i, m240i xdrive, x2 sdrive28i, x2 xdrive28i, x1 sdrive28i, x1 xdrive28i, 330i, 330i xdrive, 340i, 340i xdrive, 330i xdrive gran turismo, 530i, 530i xdrive, 540i, 540i xdrive, 530e, 530e xdrive, 640i xdrive gran turismo, 330e, 2019 430i gran coupe, 430i xdrive gran coupe, 440i gran coupe, 440i xdrive gran coupe, 430i, 430i xdrive, 440i, 440i xdrive, 740i, 740i xdrive, mini cooper, cooper s, jcw, mini countryman (cooper, cooper all4, cooper s, cooper s all4, jcw all4), and mini clubman (cooper, cooper s, cooper all4, cooper s all4, jcw all4) vehicles.
Consequence
A vehicle stall can increase the risk of a crash.
Corrective Action
Bmw will notify owners, and dealers will replace the crankshaft sensor, free of charge. The recall began september 6, 2018. Owners may contact bmw customer service at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #2 - STRUCTURE:BODY:ROOF AND PILLARS
Posted on: 2019-05-09
Description
Bmw of north america, llc (bmw) is recalling certain 2016-2019 x1 sdrive28i and x1 xdrive28i vehicles. In the event of a crash where the occupants head contacts the b-pillar, the pillar may not absorb an adequate amount of the impact. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 201, occupant protection in interior impact.
Consequence
In the event of a crash, the insufficient impact absorption can increase the risk of injury.
Corrective Action
Bmw will notify owners, and dealers will replace the vertical trim pieces on the upper portion of the interior b-pillars, free of charge. Interim letters notifying owners of the safety risk were mailed july 1, 2019. Second notices will be sent as parts become available, starting on september 27, 2019. Owners may contact bmw customer service at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #3 - STEERING:LINKAGES:TIE ROD ASSEMBLY
Posted on: 2019-08-15
Description
Bmw of north america, llc (bmw) is recalling certain 2018-2019 bmw x1 sdrive28i, x1 xdrive28i, 2019 x2 xdrive28i, mini cooper s convertible, countryman, and john cooper works countryman vehicles. The steering gear tie rod may have been assembled incorrectly, which may result in excessive wear of the tie rod end, eventually causing it to break.
Consequence
A broken steering tie rod would lead to a loss of vehicle control, increasing the risk of a crash.
Corrective Action
Bmw will notify owners, and dealers will inspect the vehicles and replace the tie rods and ball joints as necessary, free of charge. The recall began october 11, 2019. Owners may contact bmw customer service at 1-800-525-7417 or mini customer service at 1-866-825-1525.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.