7 recalls found. |
DEFECT #1 - CHILD SEAT:TETHER: CONNECTOR/CLIP
Posted on: 2020-06-30
Description
Bmw of north america, llc (bmw) is recalling certain 2020-2021 740li, 740 li xdrive, 750li xdrive, m760li xdrive, and alpina b7 vehicles. The top child seat tether anchor on the rear middle seat may not be readily accessible. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard number 225, section 6.1(b) child restraint anchorage systems.
Consequence
A child restraint system placed on the vehicle's rear middle seat without utilizing the three-point safety belt, could increase the risk of injury in the event of a crash.
Corrective Action
Bmw will notify owners, and dealers will install a top tether anchor cover at the rear middle seating position. Until vehicles are remedied, owners will be instructed to utilize the outboard rear seating positions which are equipped with an accessible top tether anchor, or, the middle rear seating position and the vehicle's three-point safety belt. The recall began august 20, 2020. Owners may contact bmw customer service at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #2 - BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Posted on: 2021-02-19
Description
Bmw of north america, llc (bmw) is recalling certain 2019-2021 x3 sdrive30i, x3 xdrive30i, x3 m40i, x3m, x4 xdrive30i, x4 m40i, m550i, x4m, x5 sdrive40i, x5 xdrive40i, x5 xdrive50i, x5m, x5 m50i, x7 xdrive40i, x7 xdrive50i, x7 m50i, alpina xb7, 330i, 330i xdrive, m340i, m340i xdrive, and 8 series coupe, convertible and grand coupe, 840i, 840i xdrive, m850i xdrive, m8, 2020-2021 530e, 530e xdrive, 330e, 330e xdrive, 745le, 745le xdrive, x5 xdrive45e, x3 xdrive30e, x6 sdrive40i, x6 xdrive40i, x6 xdrive50i, x6 m50i, x6m, 530i, 530i xdrive, 540i, 540i xdrive, m550i xdrive, m5, 740i, 740li, 740li xdrive, m760i drive, m760li xdrive, 750li xdrive alpina, alpina b7 xdrive, and 2021 4 series coupe 430i, 430i xdrive, m440i xdrive vehicles. When shifting into reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 111, rear visibility.
Consequence
If the driver relies on only the rearview camera image, the missing or reduced rearview image view can increase the risk of a crash or injury.
Corrective Action
Bmw will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began april 16, 2021. Owners may contact bmw customer service at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #3 - BACK OVER PREVENTION:SOFTWARE
Posted on: 2021-02-19
Description
Bmw of north america, llc (bmw) is recalling certain 2019-2021 x3 sdrive30i, x3 xdrive30i, x3 m40i, x3m, x4 xdrive30i, x4 m40i, m550i, x4m, x5 sdrive40i, x5 xdrive40i, x5 xdrive50i, x5m, x5 m50i, x7 xdrive40i, x7 xdrive50i, x7 m50i, alpina xb7, 330i, 330i xdrive, m340i, m340i xdrive, and 8 series coupe, convertible and grand coupe, 840i, 840i xdrive, m850i xdrive, m8, 2020-2021 530e, 530e xdrive, 330e, 330e xdrive, 745le, 745le xdrive, x5 xdrive45e, x3 xdrive30e, x6 sdrive40i, x6 xdrive40i, x6 xdrive50i, x6 m50i, x6m, 530i, 530i xdrive, 540i, 540i xdrive, m550i xdrive, m5, 740i, 740li, 740li xdrive, m760i drive, m760li xdrive, 750li xdrive alpina, alpina b7 xdrive, and 2021 4 series coupe 430i, 430i xdrive, m440i xdrive vehicles. When shifting into reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 111, rear visibility.
Consequence
If the driver relies on only the rearview camera image, the missing or reduced rearview image view can increase the risk of a crash or injury.
Corrective Action
Bmw will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began april 16, 2021. Owners may contact bmw customer service at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #4 - BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Posted on: 2021-02-19
Description
Bmw of north america, llc (bmw) is recalling certain 2019-2021 x3 sdrive30i, x3 xdrive30i, x3 m40i, x3m, x4 xdrive30i, x4 m40i, m550i, x4m, x5 sdrive40i, x5 xdrive40i, x5 xdrive50i, x5m, x5 m50i, x7 xdrive40i, x7 xdrive50i, x7 m50i, alpina xb7, 330i, 330i xdrive, m340i, m340i xdrive, and 8 series coupe, convertible and grand coupe, 840i, 840i xdrive, m850i xdrive, m8, 2020-2021 530e, 530e xdrive, 330e, 330e xdrive, 745le, 745le xdrive, x5 xdrive45e, x3 xdrive30e, x6 sdrive40i, x6 xdrive40i, x6 xdrive50i, x6 m50i, x6m, 530i, 530i xdrive, 540i, 540i xdrive, m550i xdrive, m5, 740i, 740li, 740li xdrive, m760i drive, m760li xdrive, 750li xdrive alpina, alpina b7 xdrive, and 2021 4 series coupe 430i, 430i xdrive, m440i xdrive vehicles. When shifting into reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 111, rear visibility.
Consequence
If the driver relies on only the rearview camera image, the missing or reduced rearview image view can increase the risk of a crash or injury.
Corrective Action
Bmw will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began april 16, 2021. Owners may contact bmw customer service at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #5 - BACK OVER PREVENTION:SOFTWARE
Posted on: 2021-02-19
Description
Bmw of north america, llc (bmw) is recalling certain 2019-2021 x3 sdrive30i, x3 xdrive30i, x3 m40i, x3m, x4 xdrive30i, x4 m40i, m550i, x4m, x5 sdrive40i, x5 xdrive40i, x5 xdrive50i, x5m, x5 m50i, x7 xdrive40i, x7 xdrive50i, x7 m50i, alpina xb7, 330i, 330i xdrive, m340i, m340i xdrive, and 8 series coupe, convertible and grand coupe, 840i, 840i xdrive, m850i xdrive, m8, 2020-2021 530e, 530e xdrive, 330e, 330e xdrive, 745le, 745le xdrive, x5 xdrive45e, x3 xdrive30e, x6 sdrive40i, x6 xdrive40i, x6 xdrive50i, x6 m50i, x6m, 530i, 530i xdrive, 540i, 540i xdrive, m550i xdrive, m5, 740i, 740li, 740li xdrive, m760i drive, m760li xdrive, 750li xdrive alpina, alpina b7 xdrive, and 2021 4 series coupe 430i, 430i xdrive, m440i xdrive vehicles. When shifting into reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 111, rear visibility.
Consequence
If the driver relies on only the rearview camera image, the missing or reduced rearview image view can increase the risk of a crash or injury.
Corrective Action
Bmw will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began april 16, 2021. Owners may contact bmw customer service at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #6 - BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Posted on: 2021-02-19
Description
Bmw of north america, llc (bmw) is recalling certain 2019-2021 x3 sdrive30i, x3 xdrive30i, x3 m40i, x3m, x4 xdrive30i, x4 m40i, m550i, x4m, x5 sdrive40i, x5 xdrive40i, x5 xdrive50i, x5m, x5 m50i, x7 xdrive40i, x7 xdrive50i, x7 m50i, alpina xb7, 330i, 330i xdrive, m340i, m340i xdrive, and 8 series coupe, convertible and grand coupe, 840i, 840i xdrive, m850i xdrive, m8, 2020-2021 530e, 530e xdrive, 330e, 330e xdrive, 745le, 745le xdrive, x5 xdrive45e, x3 xdrive30e, x6 sdrive40i, x6 xdrive40i, x6 xdrive50i, x6 m50i, x6m, 530i, 530i xdrive, 540i, 540i xdrive, m550i xdrive, m5, 740i, 740li, 740li xdrive, m760i drive, m760li xdrive, 750li xdrive alpina, alpina b7 xdrive, and 2021 4 series coupe 430i, 430i xdrive, m440i xdrive vehicles. When shifting into reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 111, rear visibility.
Consequence
If the driver relies on only the rearview camera image, the missing or reduced rearview image view can increase the risk of a crash or injury.
Corrective Action
Bmw will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began april 16, 2021. Owners may contact bmw customer service at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.
DEFECT #7 - BACK OVER PREVENTION:SOFTWARE
Posted on: 2021-02-19
Description
Bmw of north america, llc (bmw) is recalling certain 2019-2021 x3 sdrive30i, x3 xdrive30i, x3 m40i, x3m, x4 xdrive30i, x4 m40i, m550i, x4m, x5 sdrive40i, x5 xdrive40i, x5 xdrive50i, x5m, x5 m50i, x7 xdrive40i, x7 xdrive50i, x7 m50i, alpina xb7, 330i, 330i xdrive, m340i, m340i xdrive, and 8 series coupe, convertible and grand coupe, 840i, 840i xdrive, m850i xdrive, m8, 2020-2021 530e, 530e xdrive, 330e, 330e xdrive, 745le, 745le xdrive, x5 xdrive45e, x3 xdrive30e, x6 sdrive40i, x6 xdrive40i, x6 xdrive50i, x6 m50i, x6m, 530i, 530i xdrive, 540i, 540i xdrive, m550i xdrive, m5, 740i, 740li, 740li xdrive, m760i drive, m760li xdrive, 750li xdrive alpina, alpina b7 xdrive, and 2021 4 series coupe 430i, 430i xdrive, m440i xdrive vehicles. When shifting into reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 111, rear visibility.
Consequence
If the driver relies on only the rearview camera image, the missing or reduced rearview image view can increase the risk of a crash or injury.
Corrective Action
Bmw will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began april 16, 2021. Owners may contact bmw customer service at 1-800-525-7417.
Notes
Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.